Help needed on 9700 pro

  • Thread starter Thread starter Spencer
  • Start date Start date
S

Spencer

Since installing the 4.6 cats the smartgart AGP settings and Fastwright are
set to off and have no way of changing.

Any ideas

Spence
 
Spencer said:
Since installing the 4.6 cats the smartgart AGP settings and
Fastwright are set to off and have no way of changing.

Any ideas

Spence
Click to expand...

reinstall your motherboard drivers. AGP driver in particular
 
Spencer said:
Since installing the 4.6 cats the smartgart AGP settings and
Fastwright are set to off and have no way of changing.
Click to expand...

Fast writes off is good, about the AGP.... not sure.
Also try alt.comp.periphs.videocards.ati

Thomas
 
cowboyz said:
reinstall your motherboard drivers. AGP driver in particular
Click to expand...

I can confirm this. I decided to update my mobo drivers (nforce2) without
installing the ones that related to video (I thought that the 9700 drivers
would do this). However, when I booted the PC my AGP settings were also
inaccesable, reinstalling the whole mobo driver set resolved the problem.

BillL
 
Bill said:
I can confirm this. I decided to update my mobo drivers (nforce2)
without installing the ones that related to video (I thought that the
9700 drivers would do this). However, when I booted the PC my AGP
settings were also inaccesable, reinstalling the whole mobo driver
set resolved the problem.

BillL
Click to expand...

good to hear
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Similar Threads

Fast write and AGP 4 X Grey'd out 3
Getting an x1950 AGP running on a KT400-based mobo 4
AGP - won't allow 8x 2
9700 pro problems with AGP 8x? 4
SmartGART Hangs 6
Several Abit NF7-S v2.0 Problems (AGP, etc...) 3
AGP card reported as being a PCI card?????? 7
slow PATA disk in Centos 4

Back
Top