Help: .INF into an XPE build

[Guest]

Hello,

I've succesfully built and booted an XPE image that is just the .PMQ contents.
I've also added a .REG file component and that worked as well.
Next, I'd like to add a .INF file. I get errors.

Here's what happens:

While in Target Designer, I add the component [ Hardware | Devices | SCSI
and RAID Controllers | 3ware ] to my .SLX file.

When I build the image, I get 4 errors:

Error 1005: File not found: "3waregsm.cat"
Error 1005: File not found: "oemsetup.inf"
Error 1005: File not found: "3wDrv100.sys"
Error 1005: File not found: "3wFltDrv.sys"

These are the files that accompany the 3ware driver.

Any help you could provide is appreciated.

Thanks.

 

[Slobodan Brcin \(eMVP\)]

Mike,

http://groups-beta.google.com/group...c.windowsxp.embedded&q=repository+1005&qt_g=1
You must place all files in one folder and assign them to your custom file repository. Then you must import that by using CDBM, and
only after that TD will be able to find your files.

Read trough links from above search.

Regards,
Slobodan