Help for modem Trust MD 4050

  • Thread starter Thread starter Fabrizio
  • Start date Start date
F

Fabrizio

Hi, I sated my modem-router to connect in internet. But it not connect in
auto and the led PPP it's no light. I can connect only go to 192.168.1.1 and
click on Diagnostic so it's the way to go on line.

Do you know where I wrong something ?

Thanks Fabrizio

The error in logo is :

1/1/2000 0:0:1> MPOA Link Down
1/1/2000 0:0:1> LAN promiscuous mode <1>
1/1/2000 0:0:1> Last errorlog repeat 1 Times
1/1/2000 0:0:1> SNMP TRAP 0: cold start
1/1/2000 0:0:1> main: init completed
1/1/2000 0:0:4> SNMP TRAP 3: link up
1/1/2000 0:0:4> adjtime task pause 1 day
1/1/2000 0:1:10> MPOA Link Up
1/1/2000 0:1:16> netMakeChannDial: err=-3000 rn_p=80435ea8
1/1/2000 0:2:10> Last errorlog repeat 39 Times
1/1/2000 0:2:15> netMakeChannDial: err=-3000 rn_p=80435ea8
1/1/2000 0:2:58> Last errorlog repeat 33 Times
1/1/2000 0:2:59> netMakeChannDial: err=-3000 rn_p=80435ea8
 
Fabrizio said:
Hi, I sated my modem-router to connect in internet. But it not connect in
auto and the led PPP it's no light. I can connect only go to 192.168.1.1 and
click on Diagnostic so it's the way to go on line.

Do you know where I wrong something ?

Thanks Fabrizio

The error in logo is :

1/1/2000 0:0:1> MPOA Link Down
1/1/2000 0:0:1> LAN promiscuous mode <1>
1/1/2000 0:0:1> Last errorlog repeat 1 Times
1/1/2000 0:0:1> SNMP TRAP 0: cold start
1/1/2000 0:0:1> main: init completed
1/1/2000 0:0:4> SNMP TRAP 3: link up
1/1/2000 0:0:4> adjtime task pause 1 day
1/1/2000 0:1:10> MPOA Link Up
1/1/2000 0:1:16> netMakeChannDial: err=-3000 rn_p=80435ea8
1/1/2000 0:2:10> Last errorlog repeat 39 Times
1/1/2000 0:2:15> netMakeChannDial: err=-3000 rn_p=80435ea8
1/1/2000 0:2:58> Last errorlog repeat 33 Times
1/1/2000 0:2:59> netMakeChannDial: err=-3000 rn_p=80435ea8
Click to expand...

Hi Fabrizio,
There two possibilities in your case:
A... A bad Line or a bad Filter installed between your Router and the
Modem or to the wall, so try the splitter (Filter) with a new one. If that
didn't help then call your ISP and book a ticket with a Third Line help
Person not the first line help and tell them about these error.
B.... Bad Router or installation settings not correct, so try to connect
with the Modem and see if you will connect Okay (which will mean the Router
is dead or bad), if you are not able to connect then the Line is Bad.
HTH.
nass
 
Can you tell me right setting in network, because in Router is all ok

Fabrizio
P.s. The splitter is ok
 
Back
Top