Hardware upgrade

  • Thread starter Thread starter Inca
  • Start date Start date
I

Inca

I just changed my mainboard and CPU and tried to run my computer with the HD
(From the former system configuration) and it won't boot.

If my memory serves me, there is a way to use the win xp CD to fix this.

Can anyone tell me?

Thanks
 
Changing a Motherboard or Moving a Hard Drive with XP Installed
http://www.michaelstevenstech.com/moving_xp.html

How to Perform a Windows XP Repair Install
http://www.michaelstevenstech.com/XPrepairinstall.htm

--
Carey Frisch
Microsoft MVP
Windows - Shell/User
Microsoft Community Newsgroups
news://msnews.microsoft.com/

---------------------------------------------------------------------------­----------------

:

| I just changed my mainboard and CPU and tried to run my computer with the HD
| (From the former system configuration) and it won't boot.
|
| If my memory serves me, there is a way to use the win xp CD to fix this.
|
| Can anyone tell me?
|
| Thanks
 
Inca said:
I just changed my mainboard and CPU and tried to run my computer with
the HD (From the former system configuration) and it won't boot.

Did you try starting in safe mode? In that case, you may want to perform
a repair install. If Windows will boot, install the particular mainboard
drivers. Note that all Windows updates have to be re-installed.

"How to perform an in-place upgrade (reinstallation) of Windows XP"
http://support.microsoft.com/?kbid=315341
 
A repair install should do the trick. Obviously chnaging the motherboard and
CPU you will probably need to activate Windows again.

--
John Barnett MVP
Associate Expert
http://xphelpandsupport.mvps.org

The information in this mail is supplied "as is". No warranty of any
kind, either expressed or implied, is made in relation to the
accuracy, reliability or content of this mail. The Author shall not be
liable for any direct, indirect, incidental or consequential damages
arising out of the use of, or inability to use, information or
opinions expressed in this mail..
 
Inca said:
I just changed my mainboard and CPU and tried to run my computer with the HD
(From the former system configuration) and it won't boot.

If my memory serves me, there is a way to use the win xp CD to fix this.

Can anyone tell me?

Thanks


Normally, and assuming a retail license (many factory-installed OEM
installations are BIOS-locked to a specific chipset and therefore *not*
transferable to a new motherboard - check yours before starting), unless
the new motherboard is virtually identical (same chipset, same IDE
controllers, same BIOS version, etc.) to the one on which the WinXP
installation was originally performed, you'll need to perform a repair
(a.k.a. in-place upgrade) installation, at the very least:

How to Perform an In-Place Upgrade of Windows XP
http://support.microsoft.com/directory/article.asp?ID=KB;EN-US;Q315341

Changing a Motherboard or Moving a Hard Drive with WinXP Installed
http://www.michaelstevenstech.com/moving_xp.html

The "why" is quite simple, really, and has nothing to do with
licensing issues, per se; it's a purely technical matter, at this point.
You've pulled the proverbial hardware rug out from under the OS. (If
you don't like -- or get -- the rug analogy, think of it as picking up a
Cape Cod style home and then setting it down onto a Ranch style
foundation. It just isn't going to fit.) WinXP, like Win2K before it,
is not nearly as "promiscuous" as Win9x when it comes to accepting any
old hardware configuration you throw at it. On installation it
"tailors" itself to the specific hardware found. This is one of the
reasons that the entire WinNT/2K/XP OS family is so much more stable
than the Win9x group.

As always when undertaking such a significant change, back up any
important data before starting.

This will also probably require re-activation, unless you have a
Volume Licensed version of WinXP Pro installed. If it's been more than
120 days since you last activated that specific Product Key, you'll most
likely be able to activate via the Internet without problem. If it's
been less, you might have to make a 5 minute phone call.


--

Bruce Chambers

Help us help you:



They that can give up essential liberty to obtain a little temporary
safety deserve neither liberty nor safety. -Benjamin Franklin
 
Inca,
If a Repair Install does not work, you will probably want to get your files
off the harddrive (unless you are incredibly good about backing up) and onto
CD's or other media. This is because you will be formatting your hard drive
in order to do a clean install of Windows.

To do this, you need to take your hard drive to another computer and install
it as the slave drive. The other computer's hard drive needs to be jumpered
to allow a slave drive. Copy My Documents, Favorites, and anything else you
need, to removable media.
 
Back
Top