hal.dll new install

  • Thread starter Thread starter Guest
  • Start date Start date
G

Guest

I am installing a new windows XP Pro on am new harddrive, after windows
formats and copies the files to the harddrive I get the message missing or
corrupt file hal.dll. I have tried some of the fixes posted but still come up
witht he same problem, is it posiable that the file on the install cd is
bad??
 
You may need a system bios upgrade or this article may help.

http://support.microsoft.com/kb/216251/

--

Regards,

Dave Patrick ....Please no email replies - reply in newsgroup.
Microsoft Certified Professional
Microsoft MVP [Windows]
http://www.microsoft.com/protect

:
|I am installing a new windows XP Pro on am new harddrive, after windows
| formats and copies the files to the harddrive I get the message missing or
| corrupt file hal.dll. I have tried some of the fixes posted but still come
up
| witht he same problem, is it posiable that the file on the install cd is
| bad??
 
Thank you for your info, after falling what I could of the site I am still
having the same problem. Most of the problems with the part about the
boot.ini file deal with the fact that one needs to be in the GUE interface, I
can not get this far.
 
This was a good site, easy to read, but when I type bootcfg /rebuild the
system ask me where I want to add the installation, enter a load identifier,
and enter OS load options, any ideas what these may be?

S.Sengupta said:
How Do I Repair A Missing Or Corrupt HAL.DLL
http://xphelpandsupport.mvps.org/how_do_i_repair_a_missing_or_cor.htm

regards,
S.Sengupta[MS-MVP]

I am installing a new windows XP Pro on am new harddrive, after windows
formats and copies the files to the harddrive I get the message missing or
corrupt file hal.dll. I have tried some of the fixes posted but still come up
witht he same problem, is it posiable that the file on the install cd is
bad??
Click to expand...
Click to expand...
 
Might be.

--

Regards,

Dave Patrick ....Please no email replies - reply in newsgroup.
Microsoft Certified Professional
Microsoft MVP [Windows]
http://www.microsoft.com/protect

:
| So maybe if I tried the install on a newer motherboard that might help?
 
multi(0)disk(0)rdisk(0)partition(1)\WINDOWS="Windows XP Professional"
/fastdetect

'where' is the partition location multi(0)disk(0)rdisk(0)partition(1) (You
haven't mentioned what kind of hard drive or what partition, so your
description may be different.)
'load identifier' is the name you put in between the quotes "Windows XP
Professional"
'load options' would be /fastdetect
--
Ron Sommer

Jeff said:
This was a good site, easy to read, but when I type bootcfg /rebuild the
system ask me where I want to add the installation, enter a load
identifier,
and enter OS load options, any ideas what these may be?

S.Sengupta said:
How Do I Repair A Missing Or Corrupt HAL.DLL
http://xphelpandsupport.mvps.org/how_do_i_repair_a_missing_or_cor.htm

regards,
S.Sengupta[MS-MVP]

I am installing a new windows XP Pro on am new harddrive, after windows
formats and copies the files to the harddrive I get the message missing
or
corrupt file hal.dll. I have tried some of the fixes posted but still
come up
witht he same problem, is it posiable that the file on the install cd
is
bad??
Click to expand...
Click to expand...
Click to expand...
 
the harddrive is a seagate 200GB brand new, the OS is supose to be going on
to the C: drive or frist partion, any other sugestions?? how would I find the
display you have below in the recover console?

Ron Sommer said:
multi(0)disk(0)rdisk(0)partition(1)\WINDOWS="Windows XP Professional"
/fastdetect

'where' is the partition location multi(0)disk(0)rdisk(0)partition(1) (You
haven't mentioned what kind of hard drive or what partition, so your
description may be different.)
'load identifier' is the name you put in between the quotes "Windows XP
Professional"
'load options' would be /fastdetect
--
Ron Sommer

Jeff said:
This was a good site, easy to read, but when I type bootcfg /rebuild the
system ask me where I want to add the installation, enter a load
identifier,
and enter OS load options, any ideas what these may be?

S.Sengupta said:
How Do I Repair A Missing Or Corrupt HAL.DLL
http://xphelpandsupport.mvps.org/how_do_i_repair_a_missing_or_cor.htm

regards,
S.Sengupta[MS-MVP]


Jeff wrote:

I am installing a new windows XP Pro on am new harddrive, after windows
formats and copies the files to the harddrive I get the message missing
or
corrupt file hal.dll. I have tried some of the fixes posted but still
come up
witht he same problem, is it posiable that the file on the install cd
is
bad??
Click to expand...
Click to expand...
Click to expand...
 
Answer the questions in bootcfg /rebuild.
--
Ron Sommer

Jeff said:
the harddrive is a seagate 200GB brand new, the OS is supose to be going
on
to the C: drive or frist partion, any other sugestions?? how would I find
the
display you have below in the recover console?

Ron Sommer said:
multi(0)disk(0)rdisk(0)partition(1)\WINDOWS="Windows XP Professional"
/fastdetect

'where' is the partition location multi(0)disk(0)rdisk(0)partition(1)
(You
haven't mentioned what kind of hard drive or what partition, so your
description may be different.)
'load identifier' is the name you put in between the quotes "Windows XP
Professional"
'load options' would be /fastdetect
--
Ron Sommer

Jeff said:
This was a good site, easy to read, but when I type bootcfg /rebuild
the
system ask me where I want to add the installation, enter a load
identifier,
and enter OS load options, any ideas what these may be?

:

How Do I Repair A Missing Or Corrupt HAL.DLL
http://xphelpandsupport.mvps.org/how_do_i_repair_a_missing_or_cor.htm

regards,
S.Sengupta[MS-MVP]


Jeff wrote:

I am installing a new windows XP Pro on am new harddrive, after
windows
formats and copies the files to the harddrive I get the message
missing
or
corrupt file hal.dll. I have tried some of the fixes posted but
still
come up
witht he same problem, is it posiable that the file on the install
cd
is
bad??
Click to expand...
Click to expand...
Click to expand...
 
Ron, Thank you

Ron Sommer said:
Answer the questions in bootcfg /rebuild.
--
Ron Sommer

Jeff said:
the harddrive is a seagate 200GB brand new, the OS is supose to be going
on
to the C: drive or frist partion, any other sugestions?? how would I find
the
display you have below in the recover console?

Ron Sommer said:
multi(0)disk(0)rdisk(0)partition(1)\WINDOWS="Windows XP Professional"
/fastdetect

'where' is the partition location multi(0)disk(0)rdisk(0)partition(1)
(You
haven't mentioned what kind of hard drive or what partition, so your
description may be different.)
'load identifier' is the name you put in between the quotes "Windows XP
Professional"
'load options' would be /fastdetect
--
Ron Sommer

This was a good site, easy to read, but when I type bootcfg /rebuild
the
system ask me where I want to add the installation, enter a load
identifier,
and enter OS load options, any ideas what these may be?

:

How Do I Repair A Missing Or Corrupt HAL.DLL
http://xphelpandsupport.mvps.org/how_do_i_repair_a_missing_or_cor.htm

regards,
S.Sengupta[MS-MVP]


Jeff wrote:

I am installing a new windows XP Pro on am new harddrive, after
windows
formats and copies the files to the harddrive I get the message
missing
or
corrupt file hal.dll. I have tried some of the fixes posted but
still
come up
witht he same problem, is it posiable that the file on the install
cd
is
bad??
Click to expand...
Click to expand...
Click to expand...
 
Hi,


Your problem is it been fixed , I have encountered same problem until not
still can't fix.

Jeff said:
Ron, Thank you

Ron Sommer said:
Answer the questions in bootcfg /rebuild.
--
Ron Sommer

Jeff said:
the harddrive is a seagate 200GB brand new, the OS is supose to be going
on
to the C: drive or frist partion, any other sugestions?? how would I find
the
display you have below in the recover console?

:

multi(0)disk(0)rdisk(0)partition(1)\WINDOWS="Windows XP Professional"
/fastdetect

'where' is the partition location multi(0)disk(0)rdisk(0)partition(1)
(You
haven't mentioned what kind of hard drive or what partition, so your
description may be different.)
'load identifier' is the name you put in between the quotes "Windows XP
Professional"
'load options' would be /fastdetect
--
Ron Sommer

This was a good site, easy to read, but when I type bootcfg /rebuild
the
system ask me where I want to add the installation, enter a load
identifier,
and enter OS load options, any ideas what these may be?

:

How Do I Repair A Missing Or Corrupt HAL.DLL
http://xphelpandsupport.mvps.org/how_do_i_repair_a_missing_or_cor.htm

regards,
S.Sengupta[MS-MVP]


Jeff wrote:

I am installing a new windows XP Pro on am new harddrive, after
windows
formats and copies the files to the harddrive I get the message
missing
or
corrupt file hal.dll. I have tried some of the fixes posted but
still
come up
witht he same problem, is it posiable that the file on the install
cd
is
bad??
Click to expand...
Click to expand...
Click to expand...
 
Back
Top