geode graphics driver

  • Thread starter Thread starter =?iso-8859-1?Q?J=FCrgen_K=F6hler?=
  • Start date Start date
?

=?iso-8859-1?Q?J=FCrgen_K=F6hler?=

Hello,
is there anywhere a display driver for geode gx1 boards
with integratet national semiconductor graphic-chip. The
national website won´t help a lot!

I´ve try to run eXP at a 3,5" SBC with Geode GX1. I try the
driver for W2K - at CRT I´ve right picture, at my
flat-screen with 800x600 I´ve got no pictrue.
When I use the NT4 driver, i got a message from eXP, that
the driver to old!

Many thanks!
 
Hello,

You could try the drivers at www.xpefiles.com Some people have got them to
work, some have not. I use it daily on a Wafer-5825 from ICP America. HTH,

Brad Combs
Imago Technologies

Hello,
is there anywhere a display driver for geode gx1 boards
with integratet national semiconductor graphic-chip. The
national website won´t help a lot!

I´ve try to run eXP at a 3,5" SBC with Geode GX1. I try the
driver for W2K - at CRT I´ve right picture, at my
flat-screen with 800x600 I´ve got no pictrue.
When I use the NT4 driver, i got a message from eXP, that
the driver to old!

Many thanks!
 
Hello,

you have to restart the System with a monitor as second
device connected. Now you have a picture on the monitor
after the restart. After logon, you have to switch to the
display settings menu. In advanced menu there is an
option where you have to mark the lcd option. After the
next restart, you have the picture on the lcd panel.

Ralf
 
Back
Top