Fujitsu MPG3204AT, 20GB drive will not POST, WHY?

  • Thread starter Thread starter Andrew
  • Start date Start date
A

Andrew

I've been trying to get this drive to be recognized by my Biostar board. It
will hang the POST showing nothing when connected to the PRImary IDE
controller as MASTER. If it's on the SECondary IDE the POST will progress
fine, and the system goes on and identifies the drives... Any thoughts?

Thanks
Andrew
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Similar Threads

Booting with two hard drives in primary channel fails 28
Boot freezes at Detecting IDE Drives 0
SATA conflict 3
OS on IDE. I want it on the RAID! How? 3
No Windows XP boot with CD slaves connected 4
Windows does not recognise CD Drive 7
boot-up failure with two drives on IDE bus 14
System does not boot when connecting hard drive to SATA card vs on-boardSATA controller 5

Back
Top