Formatting C from DOS with XP installed

  • Thread starter Thread starter Becky
  • Start date Start date
B

Becky

I have a bug or overwhelming spyware or both...system
freezes up. Tried everything including customer support.
Only thing left is to formt the hard drive and start
over. Problem...I don't have access to Windows at all. Am
using a DOS boot disk. Is there a command to erase C:
with XP installed? The usual format C: string isn't
working. Help! Please. Thanks in advance.
 
The Windows XP CD is bootable and contains all the tools necessary
to partition and format your drive. Follow this procedure and allow
Windows XP to partition and format your drive:

NOTE: It would be best to physically disconnect all your peripheral hardware
devices, except the monitor, mouse and keyboard, before installing XP.

NOTE: If you have an internal Zip Drive installed, physically disconnect the
EIDE and power cable to it before proceeding, otherwise your main
hard drive may not be assigned the customary C: drive letter.
After installing Windows XP, you may then reconnect it.

1. Open your BIOS and set your "CD Drive as the first bootable device".

===> Accessing Motherboard BIOS
===> http://www.michaelstevenstech.com/bios_manufacturer.htm

2. Insert your Windows XP CD in the CD Drive and reboot your computer.
3. You'll see a message to boot to the CD....follow the instructions.
4. The setup menu will appear and you should elect to delete all the existing
Windows partitions, then create a new partition, then format the primary
partition (preferably NTFS) and proceed to install Windows XP.

5. Clean Install Windows XP
http://michaelstevenstech.com/cleanxpinstall.html

[Courtesy of Michael Stevens, MS-MVP]

6. ==> Immediately after installing Windows XP, turn on XP's Firewall.
==> http://www.microsoft.com/security/protect/

7. After Windows XP is installed, visit the Windows Update website
and download the available "Critical Updates".

8. After installing the critical updates, be sure and visit the support website
of the manufacturer of the computer to download and install any
available Windows XP compatible drivers, such as video adapter
and audio drivers.

9. If you happen to run into any installation difficulties, use the following resources:

How to Troubleshoot Windows XP Problems During Installation
http://support.microsoft.com/default.aspx?scid=kb;EN-US;310064

Troubleshooting Windows XP Setup
http://www.kellys-korner-xp.com/xp_setup.htm

[Courtesy of MS-MVP Kelly Theriot]

--
Carey Frisch
Microsoft MVP
Windows XP - Shell/User

Be Smart! Protect your PC!
http://www.microsoft.com/security/protect/

-----------------------------------------------------------------------------------


|I have a bug or overwhelming spyware or both...system
| freezes up. Tried everything including customer support.
| Only thing left is to formt the hard drive and start
| over. Problem...I don't have access to Windows at all. Am
| using a DOS boot disk. Is there a command to erase C:
| with XP installed? The usual format C: string isn't
| working. Help! Please. Thanks in advance.
 
I need to format C from DOS as I'm stuck in XP Setup. I
cannot get out. Everytime I reboot, setup automatically
starts over, reaches the 34 minute point and reboots,
starting all over. Is ther a way I can format C from DOS?
-----Original Message-----
The Windows XP CD is bootable and contains all the tools necessary
to partition and format your drive. Follow this procedure and allow
Windows XP to partition and format your drive:

NOTE: It would be best to physically disconnect all your peripheral hardware
devices, except the monitor, mouse and
keyboard, before installing XP.
NOTE: If you have an internal Zip Drive installed, physically disconnect the
EIDE and power cable to it before
proceeding, otherwise your main
hard drive may not be assigned the customary C: drive letter.
After installing Windows XP, you may then reconnect it.

1. Open your BIOS and set your "CD Drive as the first bootable device".

===> Accessing Motherboard BIOS
===> http://www.michaelstevenstech.com/bios_manufacturer.htm

2. Insert your Windows XP CD in the CD Drive and reboot your computer.
3. You'll see a message to boot to the CD....follow the instructions.
4. The setup menu will appear and you should elect to delete all the existing
Windows partitions, then create a new partition, then format the primary
partition (preferably NTFS) and proceed to install Windows XP.

5. Clean Install Windows XP
http://michaelstevenstech.com/cleanxpinstall.html

[Courtesy of Michael Stevens, MS-MVP]

6. ==> Immediately after installing Windows XP, turn on XP's Firewall.
==> http://www.microsoft.com/security/protect/

7. After Windows XP is installed, visit the Windows Update website
and download the available "Critical Updates".

8. After installing the critical updates, be sure and visit the support website
of the manufacturer of the computer to download and install any
available Windows XP compatible drivers, such as video adapter
and audio drivers.

9. If you happen to run into any installation
difficulties, use the following resources:
How to Troubleshoot Windows XP Problems During Installation
scid=kb;EN-US;310064

Troubleshooting Windows XP Setup
http://www.kellys-korner-xp.com/xp_setup.htm

[Courtesy of MS-MVP Kelly Theriot]

--
Carey Frisch
Microsoft MVP
Windows XP - Shell/User

Be Smart! Protect your PC!
http://www.microsoft.com/security/protect/

--------------------------------------------------------- --------------------------


|I have a bug or overwhelming spyware or both...system
| freezes up. Tried everything including customer support.
| Only thing left is to formt the hard drive and start
| over. Problem...I don't have access to Windows at all. Am
| using a DOS boot disk. Is there a command to erase C:
| with XP installed? The usual format C: string isn't
| working. Help! Please. Thanks in advance.
.
 
Back
Top