folder security

  • Thread starter Thread starter josey
  • Start date Start date
J

josey

How do I password protect my private files?
Does windows xp hav any in b uilt progrm to the same?
answer through e-mail
my id
(e-mail address removed)
thank You
 
You can password protect a branch of folders, such as your personal account
on a computer used by multiple people but you cannot apply a password to a
folder or a file.

You can however compress or ZIP the file or folder you want to password
protect and then you can apply a password to the Compressed Folder or ZIP
file.

To do this:-

1. Open a folder, such as the My Documents folder.
2. Choose File>New>Compressed (zipped) Folder.
3. Type the folder's name and press the Enter key.
Make sure you add the ZIP extension if you've set Windows to display
filename extensions.
4. Copy some files into the Compressed Folder.
5. Open the Compressed Folder
6. Choose File>Add Password
7. Enter the Password.
8. Type the password again to confirm.
9. Click OK.

Note: Do not forget the password or you're screwed.

If you try to open/extract a file from the Compressed Folder, you'll be
prompted for the password.
 
Just use NTFS filesystem permissions.
This is what they are for. This way people do not
have to remember another password for some folder,
rather, if they can authenticate as some account then
they will have access to what has been permitted for
that account.
 
You cannot password protect individual folders in XP. You restrict access by
assigning permissions to drives, folders and files.

To do this, you must be running NTFS as your file system on the drive in
question. If your hard disk/partition is not NTFS you will need to convert
it. To do this, open a Command Prompt window and enter the following
command:

CONVERT X: /FS:NTFS

Where X: is the drive letter you wish to convert. You may also want to see
http://www.aumha.org/a/ntfscvt.htm to ensure that you're getting the optimal
conversion.

After this step is completed and you've rebooted the computer, if necessary:

XP PRO: In Windows Explorer, go to Tools, Folder Options, View and uncheck
Use Simple File Sharing. Now, when you right click on a drive, folder or
file (on an NTFS partition) and select Properties, you'll see a Security
tab. Here you can assign or deny permissions based on user name or user
group membership.

XP Home: By default, you can only make files and folders under My Documents
"private". This is done by right clicking a folder or file and selecting
Properties, Sharing. To change the permissions on other folders, you need
to boot the computer to Safe Mode and log in on the built in Administrator
account. In this mode, you'll see the Security tab in Properties, and you
can assign permissions based on user name or group membership.

HOW TO: Set, View, Change, or Remove File and Folder Permissions in Windows
XP
http://support.microsoft.com/default.aspx?scid=kb;en-us;308418

HOW TO: Set, View, Change, or Remove Special Permissions for Files and
Folders
http://support.microsoft.com/default.aspx?scid=kb;EN-US;308419

HOW TO: Disable Simplified Sharing and Password-Protect a Shared Folder in
Windows XP
http://support.microsoft.com/default.aspx?scid=kb;EN-US;307874
 
i believe i have a similar problem, i had XP Pro NTFS, i
had user accounts and mine was password protected. i
reinstalled XP Pro but i added new accounts, now i don't
know how to log in to use my old use folder which, when i
try to access it says Access Denied. is there a way of re-
activating my old accounts using regedit or something?
thanks in advance - Dylan
 
Back
Top