Fail

[Guest]

when the second user logs on a message appears that just says "Fail" but does
not happen to appear on my user area and does not change wheather more tham
that just one user is logged on, i am using xp pro

alsp when the machine shute down and error message that i never get to read
but does say something about 0x69 i think and a 0x0000... any ideas

many thanks

 

[Guest]

when the second user logs on a message appears that just says "Fail" but does
not happen to appear on my user area and does not change wheather more tham
that just one user is logged on, i am using xp pro

alsp when the machine shute down and error message that i never get to read
but does say something about 0x69 i think and a 0x0000... any ideas

many thanks

You may have corrupted profile on this machine for that particular user, you
can try System restore to an earlier date before it happened.

Right click My computer and select Properties, then click on Advanced tab
and click on StartUp and Recovery Button.
Make sure that this check box is unchecked:
[ ] Automatically restart
Click [OK]

I will check this machine for Viruses and Malwares and make sure it is clean.
How to access the event
Viewer do the following:
Open a run command and type in:
eventvwr.msc clcik [OK] on the event Viewer Look for error Messages (X)
and double click them to get more Info about the causer and you can copy and
past in your next post.
nass
===
www.nasstec.co.uk

 

[Guest]

um there are quit a few of those round red things with the white cross in
them and htey vary from application errors to 101 (whatever that is), avg7.

avg does an update and scan every time a start up and seems to find
something every time, any ideas where i can get it sorted.
--
grapes

when the second user logs on a message appears that just says "Fail" but does
not happen to appear on my user area and does not change wheather more tham
that just one user is logged on, i am using xp pro

alsp when the machine shute down and error message that i never get to read
but does say something about 0x69 i think and a 0x0000... any ideas

many thanks

You may have corrupted profile on this machine for that particular user, you
can try System restore to an earlier date before it happened.

Right click My computer and select Properties, then click on Advanced tab
and click on StartUp and Recovery Button.
Make sure that this check box is unchecked:
[ ] Automatically restart
Click [OK]

I will check this machine for Viruses and Malwares and make sure it is clean.
How to access the event
Viewer do the following:
Open a run command and type in:
eventvwr.msc clcik [OK] on the event Viewer Look for error Messages (X)
and double click them to get more Info about the causer and you can copy and
past in your next post.
nass
===
www.nasstec.co.uk

 

[Guest]

Well, double click those Red things and Copy and paste in your next post,
but don't repeat the error, just samples from each.
Then what the AVG find, what the name of the Virus or malware?.
You can try a scan on line from other vendors.

um there are quit a few of those round red things with the white cross in
them and htey vary from application errors to 101 (whatever that is), avg7.

avg does an update and scan every time a start up and seems to find
something every time, any ideas where i can get it sorted.
--
grapes

when the second user logs on a message appears that just says "Fail" but does
not happen to appear on my user area and does not change wheather more tham
that just one user is logged on, i am using xp pro

alsp when the machine shute down and error message that i never get to read
but does say something about 0x69 i think and a 0x0000... any ideas

many thanks

You may have corrupted profile on this machine for that particular user, you
can try System restore to an earlier date before it happened.

Right click My computer and select Properties, then click on Advanced tab
and click on StartUp and Recovery Button.
Make sure that this check box is unchecked:
[ ] Automatically restart
Click [OK]

I will check this machine for Viruses and Malwares and make sure it is clean.
How to access the event
Viewer do the following:
Open a run command and type in:
eventvwr.msc clcik [OK] on the event Viewer Look for error Messages (X)
and double click them to get more Info about the causer and you can copy and
past in your next post.
nass
===
www.nasstec.co.uk

 

[Guest]

i fixed it i think, when i tried to to do a restore it would not load so i
reinstaled xp onto a new drive but stil got some
1; Product: Samsung PC Studio -- Error 1706.No valid source could be found
for product Samsung PC Studio. The Windows Installer cannot continue.

For more information, see Help and Support Center at
http://go.microsoft.com/fwlink/events.asp.

2; Hanging application Setup.EXE, version 1.4.0.7, hang module hungapp,
version 0.0.0.0, hang address 0x00000000.

For more information, see Help and Support Center at
http://go.microsoft.com/fwlink/events.asp.

3; Event filter with query "select * from ASUSVideo3DEvent" could not be
(re)activated in namespace "//./root/WMI" because of error 0x80041010. Events
may not be delivered through this filter until the problem is corrected.

For more information, see Help and Support Center at
http://go.microsoft.com/fwlink/events.asp.

and thats it now but anhelp would be good

many thanks Craig Smith
--
grapes

Well, double click those Red things and Copy and paste in your next post,
but don't repeat the error, just samples from each.
Then what the AVG find, what the name of the Virus or malware?.
You can try a scan on line from other vendors.

um there are quit a few of those round red things with the white cross in
them and htey vary from application errors to 101 (whatever that is), avg7.

avg does an update and scan every time a start up and seems to find
something every time, any ideas where i can get it sorted.
--
grapes

:

when the second user logs on a message appears that just says "Fail" but does
not happen to appear on my user area and does not change wheather more tham
that just one user is logged on, i am using xp pro

alsp when the machine shute down and error message that i never get to read
but does say something about 0x69 i think and a 0x0000... any ideas

many thanks
--
grapes

You may have corrupted profile on this machine for that particular user, you
can try System restore to an earlier date before it happened.

Right click My computer and select Properties, then click on Advanced tab
and click on StartUp and Recovery Button.
Make sure that this check box is unchecked:
[ ] Automatically restart
Click [OK]

I will check this machine for Viruses and Malwares and make sure it is clean.
How to access the event
Viewer do the following:
Open a run command and type in:
eventvwr.msc clcik [OK] on the event Viewer Look for error Messages (X)
and double click them to get more Info about the causer and you can copy and
past in your next post.
nass
===
www.nasstec.co.uk

 

[Guest]

oh and while we are here while trying to set up another aaccount with the
reinstalled system it will not allow me to select the limited user account
type - whats wrong??

 

[Guest]

Hi Craig,
So, you done a clean install on another Hard drive, what happen to the old
drive?, is it still connected and how its settings (i.e. Slave or Primary
drive?).
Try the installation again on the New drive, by reading this link to prepare
yourself and perform the new installation in the right direction:
Here is a link to prepare yourself fro clean install:
http://www.michaelstevenstech.com/cleanxpinstall.html
Please disconnect the old drive while performing the installation, then you
can set the jumpers on the old Drive to make it slave and connect it and Run
a scan on it with an anti-virus up2date to make sure nothing penetrate or
infect the new installation and you can rescue your files and document and
formate after moving or back up the data to a removable storage.
HTH.
Let us know.
nass

 

[Guest]

before i did the install i made a backup of my files first and i am using
sata drives so there is no drive jumpers, but once i have done a new install
on the new hard drive and once that had been done i installed virus software
updated it and then istalled the old hard drive and formated it. but i have
found that when i close internet explorer 7 after updating i keep getting an
exeption 0x0eedfade on application 0x7c812a5d and then another box comes up
saying error 217 at 0230f48E.

 

[Guest]

Hi Craig,
Do you have Norton installed on your computer?.
If yes, you need to use Norton removal tool to uninstall and then Reinstall,
your installation of Norton may be was not successful.
Here is a link for Norton removal tool:
http://service1.symantec.com/SUPPORT/tsgeninfo.nsf/docid/2005033108162039
1= Then try to test your memory by downloading the memtest from here:
http://www.memtest86.com/
Unzip it and make either Floppy /CD/DVD and start your computer with it and
test your memory.

2- Verify the drivers on your system they all okay by running this command:
Open a Run Command and type in:
verifier.exe click [OK] and note the result.
Do you have a Daemon tool installed on your computer, try to start clean
Boot by opening a run command and type in:
msconfig click [OK] and click StartUp Tab and uncheck the unnecessary
programs to start the OS.
"How to perform a clean boot in Windows XP"
http://support.microsoft.com/kb/310353
HTH.
Let us know.
nass
===
www.nasstec.co.uk

 

[Guest]

done all that and makes no difference still got the following

1;
The description for Event ID ( 0 ) in Source ( .NET Runtime ) cannot be
found. The local computer may not have the necessary registry information or
message DLL files to display messages from a remote computer. You may be able
to use the /AUXSOURCE= flag to retrieve this description; see Help and
Support for details. The following information is part of the event: Unable
to open shim database version registry key - v2.0.50727.00000.

2;
Product: Samsung PC Studio -- Error 1706.No valid source could be found for
product Samsung PC Studio. The Windows Installer cannot continue.

For more information, see Help and Support Center at
http://go.microsoft.com/fwlink/events.asp.

3;
Hanging application Setup.EXE, version 1.4.0.7, hang module hungapp, version
0.0.0.0, hang address 0x00000000.

For more information, see Help and Support Center at
http://go.microsoft.com/fwlink/events.asp.

4;
Event filter with query "select * from ASUSVideo3DEvent" could not be
(re)activated in namespace "//./root/WMI" because of error 0x80041010. Events
may not be delivered through this filter until the problem is corrected.

For more information, see Help and Support Center at
http://go.microsoft.com/fwlink/events.asp.

will do any harm just to leave them alone as every thing seems to be working
ok at th mo
grapes

Hi Craig,
Do you have Norton installed on your computer?.
If yes, you need to use Norton removal tool to uninstall and then Reinstall,
your installation of Norton may be was not successful.
Here is a link for Norton removal tool:
http://service1.symantec.com/SUPPORT/tsgeninfo.nsf/docid/2005033108162039
1= Then try to test your memory by downloading the memtest from here:
http://www.memtest86.com/
Unzip it and make either Floppy /CD/DVD and start your computer with it and
test your memory.

2- Verify the drivers on your system they all okay by running this command:
Open a Run Command and type in:
verifier.exe click [OK] and note the result.
Do you have a Daemon tool installed on your computer, try to start clean
Boot by opening a run command and type in:
msconfig click [OK] and click StartUp Tab and uncheck the unnecessary
programs to start the OS.
"How to perform a clean boot in Windows XP"
http://support.microsoft.com/kb/310353
HTH.
Let us know.
nass
===
www.nasstec.co.uk

before i did the install i made a backup of my files first and i am using
sata drives so there is no drive jumpers, but once i have done a new install
on the new hard drive and once that had been done i installed virus software
updated it and then istalled the old hard drive and formated it. but i have
found that when i close internet explorer 7 after updating i keep getting an
exeption 0x0eedfade on application 0x7c812a5d and then another box comes up
saying error 217 at 0230f48E.

 

[Guest]

Detailed Usage of the Event Viewer /AUXSOURCE Switch Option
http://support.microsoft.com/kb/312216
FIX: A .NET Framework 2.0-based application may require read/write
permissions to a registry key even though the application only has to read
the registry key
http://support.microsoft.com/kb/918642

<Quote>
What you are seeing is that you are trying to view an event log entry for
some Source ID but you do not have the associated resource DLL. Thus, Event
Viewer cannot find the localized resource string to display a meaningful
message -- it only knows the parameter values and some arbitrary text.

In other words, this design is wonderful for cross platform/language display
of events - users with Japanese Windows and Chinese Windows will be able to
simultaneously look at the same Event Log of an English Windows machine, and
each will see event messages perfectly localized to their respective
machines. However, the design falls apart when your machine lacks the
associated resource DLL to decode the event log entry (such as when you just
copy/export an arbitrary Event Log file from one machine to another and want
to read its events).
</Quote>


=Works: How to Troubleshoot Setup Hanging and Error Messages
http://support.microsoft.com/kb/279625
WMI Isn't Working!
http://www.microsoft.com/technet/scriptcenter/topics/help/wmi.mspx

Open a run command and type in:
regedit click [OK] on the registry editor what the value there for logging?.
[-]HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\WBEM\CIMOM\Logging =
Then open the run command and type this:
net stop winmgmt click [OK] and then Hit F5.
Again on the Run command type in:
net start winmgmt click [OK]
Reboot your computer and have a look into your log file, what error you have
there?.
HTH.
nass
===
www.nasstec.co.uk

done all that and makes no difference still got the following

1;
The description for Event ID ( 0 ) in Source ( .NET Runtime ) cannot be
found. The local computer may not have the necessary registry information or
message DLL files to display messages from a remote computer. You may be able
to use the /AUXSOURCE= flag to retrieve this description; see Help and
Support for details. The following information is part of the event: Unable
to open shim database version registry key - v2.0.50727.00000.

2;
Product: Samsung PC Studio -- Error 1706.No valid source could be found for
product Samsung PC Studio. The Windows Installer cannot continue.

For more information, see Help and Support Center at
http://go.microsoft.com/fwlink/events.asp.

3;
Hanging application Setup.EXE, version 1.4.0.7, hang module hungapp, version
0.0.0.0, hang address 0x00000000.

For more information, see Help and Support Center at
http://go.microsoft.com/fwlink/events.asp.

4;
Event filter with query "select * from ASUSVideo3DEvent" could not be
(re)activated in namespace "//./root/WMI" because of error 0x80041010. Events
may not be delivered through this filter until the problem is corrected.

For more information, see Help and Support Center at
http://go.microsoft.com/fwlink/events.asp.

will do any harm just to leave them alone as every thing seems to be working
ok at th mo
grapes

Hi Craig,
Do you have Norton installed on your computer?.
If yes, you need to use Norton removal tool to uninstall and then Reinstall,
your installation of Norton may be was not successful.
Here is a link for Norton removal tool:
http://service1.symantec.com/SUPPORT/tsgeninfo.nsf/docid/2005033108162039
1= Then try to test your memory by downloading the memtest from here:
http://www.memtest86.com/
Unzip it and make either Floppy /CD/DVD and start your computer with it and
test your memory.

2- Verify the drivers on your system they all okay by running this command:
Open a Run Command and type in:
verifier.exe click [OK] and note the result.
Do you have a Daemon tool installed on your computer, try to start clean
Boot by opening a run command and type in:
msconfig click [OK] and click StartUp Tab and uncheck the unnecessary
programs to start the OS.
"How to perform a clean boot in Windows XP"
http://support.microsoft.com/kb/310353
HTH.
Let us know.
nass
===
www.nasstec.co.uk

before i did the install i made a backup of my files first and i am using
sata drives so there is no drive jumpers, but once i have done a new install
on the new hard drive and once that had been done i installed virus software
updated it and then istalled the old hard drive and formated it. but i have
found that when i close internet explorer 7 after updating i keep getting an
exeption 0x0eedfade on application 0x7c812a5d and then another box comes up
saying error 217 at 0230f48E.