ewfmgr c: command -> system crash 60+seconds

  • Thread starter Thread starter Brad Combs
  • Start date Start date
B

Brad Combs

Mick,

What does crash mean? Blue Screen (If so details will help)? System Freeze?
etc,.... Also, whats the shell that you are running at startup?

Brad Combs
Imago Technologies
 
Brad,
sorry I forgot that info. Its a blue screen 0x8. I start the command shell
and type ewfmgr and that will not result in the blue screen. but when I type
ewfmgr e: it will show the information and results in a blue screen after a
while.
Thanks,

Mick
 
Well, actually I think I have a different problem here. I tried several
different scenarious to reproduce the blue screen and it seems that I do not
even have to start the cmd shell for it to happen.
I will try to figure out what actually causes the blue screen.
Thanks for the reponds,

Mick
 
Mick:

In case you don't already have them, I recommend you apply the QFE's Q816654
and Q823025 since they resolve numerous issues, some of which were BSOD's,
with the EWF.

HTH... Doug
 
Thanks for the tip. I appreciate it.

Mick.


Doug Hoeffel said:
Mick:

In case you don't already have them, I recommend you apply the QFE's Q816654
and Q823025 since they resolve numerous issues, some of which were BSOD's,
with the EWF.

HTH... Doug
When
Click to expand...
 
Hi there,
I am using ewf and it seems to do the overlays and everything. When I type
in the cmd shell "ewfmgr c:" it displays all the info. But somehow when I
leave the command shell open the system will crash after about two minutes.
It will not crash when I close the cmd shell and do other stuff. I don't
have any screen savers or something enabled or running.
Thankfull for any suggestions.

Greetings,

mick
 
Back
Top