El Torito

  • Thread starter Thread starter Fabio Gianzanti
  • Start date Start date
F

Fabio Gianzanti

Hello all,

I'm trying to create a bootable CD-ROM but something must
be wrong, because, I still get that 0x7B error in the
boot process (just after the white progress bar at the
bottom of the screen disappears).

I followed to steps described in the help and fails when
executing etprep -all with the following message

Deleted EWF partitions = 1.
Start value for Redbook/IMAPI services has been reset
to zero.
Failed to swap El Torito disk drive letter. Error =
0x1 .

The fbalog.txt didn't show any errors.

I double checked all process that help teach, but no
success. I'm using the SP1 version of xp embedded.

Any ideas ??

Thanks in advance,

Fabio Gianzanti
 
Yeap,
I am having the exact problem that you have. Does anyone figure this
out yet ? If so, I would like to know how.

Thank you in advance
William
 
The partition in which you are running FBA must be formatted for FAT16, not
FAT32. Try reformatting your setup partition and see if that doesn't fix
the problem.

tks
Dan
 
Back
Top