DSL Sharing between 2 networks in one network hub

  • Thread starter Thread starter CoWBoY
  • Start date Start date
C

CoWBoY

Hello
I have two different company network, in same hub, same DSL.
How can seperate and secure this two network from each other?
I was thinking to put different subnets like 192.168.1.x and 192.168.2.x
But then gateways and internet may screw up. Any suggestion? Thanks in
advance
 
Subnets are separated by routers, you will need a router. The gateway in
both subnets will there respect interface for that subnet. The router will
need at least two nics. one will be assigned 192.168.1.254 and the other
will be 192.168.2.254, these will be your gateways for each subnet. The
router will need a route statement to the DSL router.
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Similar Threads

Logical routing within physical network segment!! PLEASE HELP GIVING ADVICES!! 7
Home Networking Question: Bridging/IP Forwarding between 2 LAN segments 11
Questions about sharing a DSL connection between two networks 6
I must be an idiot -- general routing question 2
how to have more than 254 clients in a network 3
ICS netowrk share wireless network 1
DHCP - 2 NICs 2
Internet sharing for 2 different LAN 3

Back
Top