Do these PSU readings look OK?

  • Thread starter Thread starter Ron Joiner
  • Start date Start date
R

Ron Joiner

I have an older PII-233 which I am trying to revive. It has a 200W PSU.
I think I might have a MB issue because I am gettting a system boot
failure and my CMOS cannot auto detect the HDD. However my PSU readings
are as follows and I want to eliminate this as an issue:

3.3V Voltage 3.24V
VTT(+1.5) Voltage 1.5
+5V Voltage 4.97 to 4.99
VCCVID (CPU) Voltage 2.81V
+12 Voltage 11.9
-12 Voltage -12.16
-5 Voltage -5.25

Do they seem right?

Ron
 
Ron Joiner said:
I have an older PII-233 which I am trying to revive. It has a 200W PSU. I
think I might have a MB issue because I am gettting a system boot failure
and my CMOS cannot auto detect the HDD. However my PSU readings are as
follows and I want to eliminate this as an issue:

3.3V Voltage 3.24V
VTT(+1.5) Voltage 1.5
+5V Voltage 4.97 to 4.99
VCCVID (CPU) Voltage 2.81V
+12 Voltage 11.9
-12 Voltage -12.16
-5 Voltage -5.25

Do they seem right?
Click to expand...

Yup, they look fine. Your problem is most likely in your mainboard. -Dave
 
Back
Top