Open Forward Lookup Zones, delete the "." zone, refresh the DNS console,
then you can add your forwarder. BTW, deleting this zone enables root hints,
so it will begin resolving external names without a forwarder.
Currently we are using a DLINK Router as a DHCP server
(192.168.x.x) I was reading a post saying that this is
not recommended. How do i configure the DHCP service on
the Windows 2000 Server to handout these IP addresses??
Currently we are using a DLINK Router as a DHCP server
(192.168.x.x) I was reading a post saying that this is
not recommended. How do i configure the DHCP service on
the Windows 2000 Server to handout these IP addresses??
Using the DHCP management console, you simply click new scope, this starts a
wizard that sets up commonly used scope options like DNS addresses, DNS
domain name, WINS server and node type. Then authorize it in Active
Directory and it is ready to go.
Using the DHCP management console, you simply click new scope, this
starts a wizard that sets up commonly used scope options like DNS
addresses, DNS domain name, WINS server and node type. Then authorize
it in Active Directory and it is ready to go
Then disable the DHCP server on the router. And run ipconfig /release
..../renew on all workstations if you're using a scope that overlaps whatever
the DLink is doing now.
Also, I suggest setting up the DHCP scope on the server from xxx.xxx.xxx.1 -
..254, and make exclusions in it - such as, exclude .1 - .100, and .200 -
..254 (or somesuch). This will make it easier to change your scope later. Use
..1 - .100 for statics (server, router, printers, etc.).
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.
