Digital camera freezes windows

  • Thread starter Thread starter Guest
  • Start date Start date
G

Guest

If I connect my Sony DSC-S70 camera via a USB port to my computer running windows XP it freezes up
When I go to My Computer and click on the USB camera icon nothing happens and I have to turn off the camera to unfreeze it. If I go to My Computer and then turn on the camera, I can click on the Icon and most of the time if I can click on the folders very rapidly I can get tumbnails of the pictures from the camera but then can't print , copy , move or export them to another program. Windows freezes and the only way I can unfreeze is to turn the camera off. HELP
 
-----Original Message-----
If I connect my Sony DSC-S70 camera via a USB port to my
Click to expand...
computer running windows XP it freezes up.
When I go to My Computer and click on the USB camera
Click to expand...
icon nothing happens and I have to turn off the camera to
unfreeze it. If I go to My Computer and then turn on the
camera, I can click on the Icon and most of the time if I
can click on the folders very rapidly I can get tumbnails
of the pictures from the camera but then can't print ,
copy , move or export them to another program. Windows
freezes and the only way I can unfreeze is to turn the
camera off. HELP
.
Hey Ross, I'm not sure if this is your problem or not
Click to expand...
but it might be worth checking out, or at least reading.
Good luck.

AND NOW FOR TODAY'S TIP... Problems with USB peripherals

Q. I have a digital camera. When I download pictures, it
works fine
when it is plugged into the USB hub. But when I plug it
into a USB
port, nothing happens. What's going on?

A. USB is a great way to connect peripherals to your
computer. It can
be used to attach printers, scanners, cameras, keyboards,
speakers and
more to your computer.

As you already know, you don't need a separate power
supply for
USB gadgets. But this does not mean that the amount of
power is
unlimited. Your problem has to do with the power, or in
your case,
not having enough.

You see, USB devices are supposed to draw between 50 and
500 milliamps.
If your camera is drawing more than 500 milliamps, the
port can't
provide it. And along the same lines, if the camera draws
less than 50
milliamps, the port will not recognize it.

Commonly, you can spot this problem if a peripheral works
on a powered
hub, but not with a port. That appears to be your case.
It will also
show up if other peripherals are working, but then quit
when the device
with a problem is hooked up.

One way to get around this is to use a self-powered hub.
Since you
have a hub, and the camera works with it, that is what I
would do.
If you prefer, you can check with the camera
manufacturer. It may
have upgraded software to correct the problem.

Under USB specifications, you can hook up five powered
hubs in
a Series
 
Back
Top