DI7 or Ghost 10 support USB 2.0 when booting their CD?

  • Thread starter Thread starter Markeau
  • Start date Start date
M

Markeau

When booting the Drive Image 7 or Ghost 10 CD, is USB 2.0 supported?
I just tried DI7 and it looks like a drive restore is only going at
USB 1.x speed. Yes I realize I could get USB 2.0 speed if I do a
drive to drive copy when booted into XP, but I don't have the 2.5" IDE
adapters needed for that right now.

I do have 2 USB 2.0 2.5" enclosures on order, but it would still be
good to know if USB 2.0 is supported in at least Ghost 10 - there was
no mention of that on the Symantec site, KB nor the online User Guide.
 
If the answer is negative, try Firewire. Firewire interface does work on
restore CD DI 7.0 with my hardware setup.
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Similar Threads

Speed of an IDE drive in a USB enclosure ? 18
Ghost 2003 at USB 2.0 speed 13
USB PCI card require OS drivers? 8
image copying drive through USB? 15
Norton Ghost,USB 2.0 enclosure, 27mb/minute clone took 9 hours for 17gb 4
Strange USB Hard drive and Ghost 9.0 Interaction 17
Ghost 2003 - USB boot floppy - cannot find COMMAND.COM 1
USB and Firewire Drive Enclosures - will they support 500-750 GB IDE drives ?? 3

Back
Top