Bassman said:
I have a MSI km4m-v AMD board that I wanted to upgrade the memory. I
found a deal at Fry's for 2gb of PC3200. I thought I had 400fsb but
turns out the MB supports up to 333fsb. I was reading that my MB
supports memory at 2.5v. I was wondering if PC3200 w/400fsb will run
at this voltage or higher? Does it really matter since my system runs
max at 333fsb?
Thanks is advance for your assistance
It is absolutely essential that any new RAM module(s) be fully
compatible with both the motherboard and/or any other RAM module(s)
already in the system. Additionally, there are sometimes jumper
switches on older motherboards that need to be reset for new RAM
configurations. Consult your motherboard's manual or the
manufacturer's web site for specific instructions and compatibility
requirements.
If you cannot lay your hands upon the computer's manual and the
manufacturer doesn't provide a support web site, you can use these
utilities to help determine the correct type of RAM needed:
SiSoft's Sandra
http://www.sisoftware.co.uk/index.php?dir=&location=sware_dl&lang=en
Belarc Advisor
http://www.belarc.com/free_download.html
Unlimited Possibilities' AIDA32
http://forum.aumha.org/overflow/aida32.zip
Also, Crucial Memory's web site (
www.crucial.com) has a database
to help to find the right RAM for your specific make and model
computer and/or motherboard. (Incidentally, Crucial is the only company
from which I ever buy RAM. I've never been disappointed.)
--
Bruce Chambers
Help us help you:
They that can give up essential liberty to obtain a little temporary
safety deserve neither liberty nor safety. -Benjamin Franklin
Many people would rather die than think; in fact, most do. -Bertrand Russell
