D Link with Windows XP service pack 3

[wesmo]

I run a D Link router and when I install the latest service pack, the router
will not load up. Any suggestions? Should I just not run the update?

 

[smlunatick]

I run a D Link router and when I install the latest service pack, the router
will not load up. Any suggestions? Should I just not run the update?

There is nothing that is supposed to "load up" when you connect any PC
to a router. Do you mean you do not get an "IP" from the router or
can you not access the router's internal web pages?

Check the firewall software and any anti-virus software?

(I know that a D-Link router works since I am using a DIR-615!!!)

 

[Mike Hall - MVP]

I run a D Link router and when I install the latest service pack, the
router
will not load up. Any suggestions? Should I just not run the update?

Will not load up???

--
Mike Hall - MVP
How to construct a good post..
http://dts-l.com/goodpost.htm
How to use the Microsoft Product Support Newsgroups..
http://support.microsoft.com/default.aspx?pr=newswhelp&style=toc
Mike's Window - My Blog..
http://msmvps.com/blogs/mikehall/default.aspx

 

[PA Bear [MS MVP]]

What has D-Link Support had to say about this?
============================
Device Manager and Network Connections may be blank after you install
Windows XP Service Pack 3
http://support.microsoft.com/kb/953791

Device Manager may not show any devices and Network Connections may not show
any network connections after you install Windows XP Service Pack 3
http://support.microsoft.com/kb/953979

Free unlimited installation and compatibility support is available for
Windows XP, but only for Service Pack 3 (SP3), until 14 Apr-09. Chat and
e-mail support is available only in the United States and Canada.

• US:
http://support.microsoft.com/oas/default.aspx?ln=en-us&prid=11273&gprid=522131

• CA:
http://support.microsoft.com/oas/default.aspx?ln=en-ca&prid=11273&gprid=522131

• UK:
http://support.microsoft.com/oas/default.aspx?ln=en-gb&prid=11273&gprid=522131

• AU:
http://support.microsoft.com/oas/default.aspx?ln=en-au&prid=11273&gprid=522131

• Other: http://support.microsoft.com/oas/default.aspx?gprid=1173 | select
Windows XP | select Windows XP Service Pack 3

 

[nass]

I run a D Link router and when I install the latest service pack, the router
will not load up. Any suggestions? Should I just not run the update?

What happen if you open your browser and type in the address bar the IP
192.168.1.1
Are you able to access the router page?

What if after installing the Windows XP Service Pack 3 (SP3)
http://support.dlink.com/faq/view.asp?prod_id=3002&orig=1

on the Run command type in:
ipconfig /flushdns click [OK]
ipconfig /renew click [OK]
netsh winsock reset click [OK]
Reboot your machine and see if you can access any website/link easily and
without the cannot connect error message.
or this tool (winsock-Fix) from here:
http://www.nasstec.co.uk/tools.html
Reboot your machine and see if the webpages will display.

If that doesn't help try these steps:
= Power or unplug the Power cord for the Router/Modem for about 40 seconds or
so be generous with it <g> turn the computer OFF and wait for the time to go
by!!.
Then Turn the Router/Modem ON and wait a minute or so then Power ON the
computer and try to establish a connection and try the link, does it work?.
How to troubleshoot network connectivity problems in Internet Explorer
http://support.microsoft.com/default.aspx/kb/936211

Drivers downloads
http://www.dlink.co.uk/?go=jN7uAYLx...qnHtD85pJVJ23gKHtOQ5A8ruEbIq3DNG5/jQDkMVLFP8=

Diagnostics
http://www.dlink.co.uk/?go=jN7uAYLx...Cr85YWN7ry+OxbR9MsufPL9b0TI+/+icIk8lPG/4Ua5bP

HTH
nass