CPU error after installing SP1a

  • Thread starter Thread starter Jamp
  • Start date Start date
J

Jamp

After installing SP1a my computer fails to start claiming
I have an improper CPU frequency setting.

It only runs the first command screens and then re-boots.

Windows XP Home edition has too many bugs - I need the
service pack to work!

Help!

Thanks, Jamp
 
And what setting do you have in your over-clocked computer?
You might reset the FSB/CPU to a standard speed, get it to
boot and then try the OC again if you must.


message | After installing SP1a my computer fails to start claiming
| I have an improper CPU frequency setting.
|
| It only runs the first command screens and then re-boots.
|
| Windows XP Home edition has too many bugs - I need the
| service pack to work!
|
| Help!
|
| Thanks, Jamp
 
That's coming from the BIOS, not Windows. You'll need to go into the BIOS
and verify the settings for the type of CPU you have. If you're unfamiliar
with this see the manual or contact the computer vendor.

--
J.C. Hornbeck, MCSE
Microsoft Product Support

NOTE: Please reply to the newsgroup and not directly to me. This allows
others to add to and benefit from these threads and also helps to ensure a
more timely response. Thank you!

This posting is provided "AS IS" without warranty either expressed or
implied, including, but not limited to, the implied warranties of
merchantability or fitness for a particular purpose.
 
Don't overclock if you don't know what you are doing. You can destroy your
M/B!

--
Regards:

Richard Urban

aka Crusty (-: Old B@stard :-)
 
After installing SP1a my computer fails to start claiming
I have an improper CPU frequency setting.

It only runs the first command screens and then re-boots.

Windows XP Home edition has too many bugs - I need the
service pack to work!
Click to expand...
Its not XP but its your overclocked CPU, reset it to a lower MHz so
that XP will work correctly.

Peter Hutchison
Windows FAQ
http://www.pcguru.plus.com/
 
Back
Top