Configuring NAT server

  • Thread starter Thread starter Ivan
  • Start date Start date
I

Ivan

I am using ADSL and my home server have 2 NICs connecting
2 networks (and one NIC for the modem of course). I've
configured the NAT server following the guide on the MS
website, however the client cannot connect to the
internet. Could anyone tell me how to set it up step by
step? Thanks.
 
1) Install Routing and Remote Access using RRASMgmt.msc

choose "Custom Configuration"
choose "NAT and basic firewall" and "LAN routing"

2) Setup NAT

add the Internet interface as public and check the "Enable NAT on
this Interface" checkbox
add the InsideSubnet interface as private

3) the default gateway on your NAT box should point to your ISP's router

4) the default gateway on your Internal hosts should point to your NAT box's
InsideSubnet IP
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Similar Threads

Internet Sharing through NAT 9
Win2003-NAT outbound connection mapping delete 0
About NAT in Windows Server 2003. 1
Guidance with NAT on W2K3 3
client connect to the internet by NAT/Basic firewall, cannot get Windows Update 2
Problem configuring NAT to share Internet Connection 13
configuring a VPN into home 2
natting with isdn connecton 9

Back
Top