computer doesnt boot straight away!! need help plz!

  • Thread starter Thread starter mr_algeria
  • Start date Start date
M

mr_algeria

I have finished making my first build specs: antec NeoHe 500, gigabyte
DS3, super-talent ram, E6300. When I booted the first time ithe
computer attempts to boot then turns off then boots by itself second
time perfectly and goes into bios no problems. what is up with that??
Btw it might be worth mentioning that I have an acrylic case as well
incase it has something to do with static electricity?!

any help appreciated,
thanx
 
I have finished making my first build specs: antec NeoHe 500, gigabyte
DS3, super-talent ram, E6300. When I booted the first time ithe
computer attempts to boot then turns off then boots by itself second
time perfectly and goes into bios no problems. what is up with that??
Btw it might be worth mentioning that I have an acrylic case as well
incase it has something to do with static electricity?!

any help appreciated,
thanx

set the cmos defaults for safe boot
check memory timings
 
I have finished making my first build specs: antec NeoHe 500, gigabyte
DS3, super-talent ram, E6300. When I booted the first time ithe
computer attempts to boot then turns off then boots by itself second
time perfectly and goes into bios no problems. what is up with that??
Btw it might be worth mentioning that I have an acrylic case as well
incase it has something to do with static electricity?!

any help appreciated,
thanx

Can you get another brand of power supply ?
This could be a NeoHE problem. There were problems
with NeoHE in 2005.

http://www.silentpcreview.com/forums/viewtopic.php?p=224630

Paul
 
Actually after doing some more research I have found many people with
the DS3 or S3 board have the same problem until they update the BIOS,
so its a mobo problem.

thanks God for that
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Back
Top