Combo PCI Card Error

  • Thread starter Thread starter David Fleischer
  • Start date Start date
D

David Fleischer

Here are the specifics:

New Dell P4 2.66
installed combo PCI - USB 2 and Firewire
attached Sony drx-510ULX
and now I get this error message - "The Generic USB hub is
a high-speed USB device and will not function at reduced
speed when plugged into a non-HI-SPEED port."



in looking at the message it appears that the "mass
storage device" the sony
is daisy chained to the USB 2 Hub
So why the error?
 
the hub that it is referring to - is my Dell 1901fp
monitor which is a USB2.0 Hub - I have this device plugged
into the PCI combo card so the Hub should see that it is
USB 2.0.

error message

"The generic USB hub is a high speed device and will
function at reduced speed when plugged into a high non-HI-
SPEED USB Device".

But in the daisy chain diagram shown on the error message
it show the HUB comes after the VIA USB 2.0 Enhanced Host
Controller
 
Back
Top