Can't print landscape from network printer HP 4050N

  • Thread starter Thread starter Guest
  • Start date Start date
G

Guest

Dear all,

I can't print landscape from the network printer although i've re-install MS OFFICE 2000, uninstall and update HP drivers and check the settings(from portrait to landscape) from the printer also can't solve this problem. Not only me having this problem, there are several user also faced this problem too. Therefore, I suspect it's not the Windows 2000 issue. Any advise will be much appreciated. Thank you.
 
Not an expert but, are the drivers installed on the individual machines?
(they should be).

--
Regards;
Rob
------------------------------------------------------------------------
Aaron Tan said:
Dear all,

I can't print landscape from the network printer although i've
Click to expand...
re-install MS OFFICE 2000, uninstall and update HP drivers and check the
settings(from portrait to landscape) from the printer also can't solve
this problem. Not only me having this problem, there are several user
also faced this problem too. Therefore, I suspect it's not the Windows
2000 issue. Any advise will be much appreciated. Thank you.
 
1. Try setting the *printer* default print to landscape via
Print/Properties. Have a lookat the other settings while you are
there.

2. Get hold of a manual for the printer and check out the manual
settings available by pressing its buttons on the panel. Start with
power off/power on to reset to factory defaults.
 
Back
Top