cannot use system restore

[Headtheball]

I reinstalled win xp home a week ago and set the sys restore to its maximum
12%, I tried to restore back to the first restore point but after a lengthy
wait it told me that I could not restore to that point, why should that
happen, I have sys restore enabled.

 

[Rick \Nutcase\ Rogers]

Hi,

Once System Restore goes bad, the only thing you can do is stop it and
restart it. Start/run services.msc, locate the SR service and doubleclick
it. Click the stop button, then set the startup type dropdown to disabled.
Click apply/ok, then reboot.

Then, check the "System Volume Information folder" on each drive (you may
need to set folder options/view tab to see hidden and system folders for
this) and delete any contents. Reverse the steps to restart it.

Be forewarned that doing this removes all existing restore points, but it
doesn't really matter as they weren't working anyways.

If this does not help, follow these steps to reinstall System Restore:

Go to the Control Panel/Folder Options/View tab, set it to "Show hidden
files and folders" and uncheck "Hide protected operating system files
[recommended]". Also uncheck "Hide extensions for known file types".

Then, open Windows Explorer from Start/All Programs and go to the
C:\Windows\Inf folder. Locate the sr.inf file, right-click it and choose
install.

You may need to either insert your WinXP CD or know where your I386 folder
is located on the hard drive. You may also need to know where the
\ServicePackFiles folder is (usually under the Windows directory).

--
Best of Luck,

Rick Rogers aka "Nutcase" MS-MVP - Windows
Windows isn't rocket science! That's my other hobby!

Associate Expert - WinXP - Expert Zone

 

[Headtheball]

sorry I havent replied sooner but thanks Rick, I tried to find the sr.inf
file but it doesn't exist so I can't right click on it to install it.If I am
missing files wouldn't sfc /scannow do the trick? I thought that this
replaced missing files or am I wrong in thinking this?

Hi,

Once System Restore goes bad, the only thing you can do is stop it and
restart it. Start/run services.msc, locate the SR service and doubleclick
it. Click the stop button, then set the startup type dropdown to disabled.
Click apply/ok, then reboot.

Then, check the "System Volume Information folder" on each drive (you may
need to set folder options/view tab to see hidden and system folders for
this) and delete any contents. Reverse the steps to restart it.

Be forewarned that doing this removes all existing restore points, but it
doesn't really matter as they weren't working anyways.

If this does not help, follow these steps to reinstall System Restore:

Go to the Control Panel/Folder Options/View tab, set it to "Show hidden
files and folders" and uncheck "Hide protected operating system files
[recommended]". Also uncheck "Hide extensions for known file types".

Then, open Windows Explorer from Start/All Programs and go to the
C:\Windows\Inf folder. Locate the sr.inf file, right-click it and choose
install.

You may need to either insert your WinXP CD or know where your I386 folder
is located on the hard drive. You may also need to know where the
\ServicePackFiles folder is (usually under the Windows directory).

--
Best of Luck,

Rick Rogers aka "Nutcase" MS-MVP - Windows
Windows isn't rocket science! That's my other hobby!

Associate Expert - WinXP - Expert Zone

I reinstalled win xp home a week ago and set the sys restore to its maximum
12%, I tried to restore back to the first restore point but after a
lengthy
wait it told me that I could not restore to that point, why should that
happen, I have sys restore enabled.

 

[Rick \Nutcase\ Rogers]

Hi,

Sfc might replace missing files, but that's not necessarily going to get
System Restore working. Have you set folder options/view tab to see hidden
and system files?

--
Best of Luck,

Rick Rogers aka "Nutcase" MS-MVP - Windows
Windows isn't rocket science! That's my other hobby!

Associate Expert - WinXP - Expert Zone

sorry I havent replied sooner but thanks Rick, I tried to find the sr.inf
file but it doesn't exist so I can't right click on it to install it.If I
am
missing files wouldn't sfc /scannow do the trick? I thought that this
replaced missing files or am I wrong in thinking this?

Hi,

Once System Restore goes bad, the only thing you can do is stop it and
restart it. Start/run services.msc, locate the SR service and doubleclick
it. Click the stop button, then set the startup type dropdown to
disabled.
Click apply/ok, then reboot.

Then, check the "System Volume Information folder" on each drive (you may
need to set folder options/view tab to see hidden and system folders for
this) and delete any contents. Reverse the steps to restart it.

Be forewarned that doing this removes all existing restore points, but it
doesn't really matter as they weren't working anyways.

If this does not help, follow these steps to reinstall System Restore:

Go to the Control Panel/Folder Options/View tab, set it to "Show hidden
files and folders" and uncheck "Hide protected operating system files
[recommended]". Also uncheck "Hide extensions for known file types".

Then, open Windows Explorer from Start/All Programs and go to the
C:\Windows\Inf folder. Locate the sr.inf file, right-click it and choose
install.

You may need to either insert your WinXP CD or know where your I386
folder
is located on the hard drive. You may also need to know where the
\ServicePackFiles folder is (usually under the Windows directory).

--
Best of Luck,

Rick Rogers aka "Nutcase" MS-MVP - Windows
Windows isn't rocket science! That's my other hobby!

Associate Expert - WinXP - Expert Zone

I reinstalled win xp home a week ago and set the sys restore to its maximum
12%, I tried to restore back to the first restore point but after a
lengthy
wait it told me that I could not restore to that point, why should that
happen, I have sys restore enabled.