Cannot copy over wireless

  • Thread starter Thread starter Andreas Y.
  • Start date Start date
A

Andreas Y.

I try to copy a large file (Vista SP1)-444MB from one Vista machine to
another. I have tried to initiate the copy several times from either sides
(source to destination / destinbation from source). I always stops at some
point with a network error, you can always resume by pushing "try again" but
it can never succeed. I pluged my laptop to network cable and the copy was
done in less than a minute. Any ideas why?
 
it could be thewireless incompatible issue. Try to disable IPv6 first. or
these links may help.

Vista incompatible issuesVista Incompatible issues. 1. Some switches or
routers may not compatible with Vista - Solutions: upgrade the firmware,
disable the IPv6, re-configure the ...
www.chicagotech.net/vista/vistacompatible.htm

Vista IPCONFIG and Network SettingsHow to disable Auto-tuning on
Windows Vista · How to disable TCP/IPv6 · How to remove IPv6 and Tunnel
completely on Vista ...
www.howtonetworking.com/vista/vistaipconfig.htm



--
Bob Lin, MS-MVP, MCSE & CNE
Networking, Internet, Routing, VPN Troubleshooting on
http://www.ChicagoTech.net
How to Setup Windows, Network, VPN & Remote Access on
http://www.HowToNetworking.com
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Similar Threads

Vista to XP large file transfers over wireless fail consistently 2
Sharing files over a wireless network 1
That slow network file copy thing revisited 2
Network freezes /crashes when it's heavly used on Windows Vista 10
Vista cannot connect to my wireless router 6
Vista SP1 large file copy issues 1
wireless network setup 3
wireless network question 2

Back
Top