Attaching Additional IDE Drive

  • Thread starter Thread starter Tim Houle
  • Start date Start date
T

Tim Houle

Just a quick question because I dont currently have a
system to test. If I attach an additional IDE drive to my
XPE box and reboot, XPE should detect the drive right?
Will it load a drive letter or do I need to run Disk
Admin?

Thanks,
Tim
 
Hi Tim,

There is no thing like drive letter with fixed disks. You get volume letters for each disk partition that is not hidden.

So XPe will give you all volume letters for disk you insert automatically.

Make sure:
1. That each HDD have different DiskID (do not use two cloned disks in the same device).
2. That disk is formatted.
3. That disk driver did not failed (vetoed) during the XPe load. If it did you will need to commit EWF and reboot computer.

Best regards,
Slobodan
 
Thanks Slobodan.
-----Original Message-----
Hi Tim,

There is no thing like drive letter with fixed disks.
Click to expand...
You get volume letters for each disk partition that is
not hidden.
So XPe will give you all volume letters for disk you insert automatically.

Make sure:
1. That each HDD have different DiskID (do not use two
Click to expand...
cloned disks in the same device).
2. That disk is formatted.
3. That disk driver did not failed (vetoed) during the
Click to expand...
XPe load. If it did you will need to commit EWF and
reboot computer.
Best regards,
Slobodan


"Tim Houle" <[email protected]> wrote
Click to expand...
in message news:[email protected]...
 
Back
Top