accessing servers

  • Thread starter Thread starter Guest
  • Start date Start date
G

Guest

i have a dhcp server serving multiple subnets.
when the link goes down the workstations go to the default address 169.254.?.?
what would be the best solution to allow users to get to the local resorces
until the link is restored?

can i change XP to use a different default address range or will it be
something i need to handle in routing?
 
i have a dhcp server serving multiple subnets.
when the link goes down the workstations go to the default address
169.254.?.? what would be the best solution to allow users to get to
the local resorces until the link is restored?

can i change XP to use a different default address range or will it be
something i need to handle in routing?
Click to expand...

One thing you can try is configuring the clients with an alternate
configuration in TCP/IP properties. This is a static configuration that is
used by the client computer when the computer is configured as a DHCP
client but the DHCP server is unavailable.

The only catch is that the configuration is static -- so you could
conceivably cause an IP address conflict if you aren't careful in how you
set it up. One approach would be to assign reservations for clients on the
DHCP server, and then use the same reserved IP address in the alternate
configuration for that client. Another possibility (though I have not
tested this) is to create an exclusion range on the DHCP server and only
create alternate configurations from the IP addresses in the exclusion
range.

A couple of Help topics for you:

DHCP client alternate configuration
http://www.microsoft.com/technet/prodtechnol/windowsserver2003/library/Serv
erHelp/64dafe38-ad61-4acb-beb5-d83dc372f18c.mspx

Use DHCP client alternate configuration
http://www.microsoft.com/technet/prodtechnol/windowsserver2003/library/Serv
erHelp/b967d7cf-6dea-4c80-9177-d9e1cc5277b4.mspx



--
James McIllece, Microsoft

Please do not send email directly to this alias. This is my online account
name for newsgroup participation only.

This posting is provided "AS IS" with no warranties, and confers no rights.
 
your solutions require manual configuration and maintaining lists.

can XP be configured to use my choice of address range default?
 
your solutions require manual configuration and maintaining lists.

can XP be configured to use my choice of address range default?
Click to expand...

That's true. I guess another possibility is to place a DHCP server on each
subnet.

I don't know whether you can change the behavior of IP address
autoconfiguration on XP, perhaps somebody familiar with that subject has a
suggestion.

--
James McIllece, Microsoft

Please do not send email directly to this alias. This is my online account
name for newsgroup participation only.

This posting is provided "AS IS" with no warranties, and confers no rights.
 
Back
Top