Accessing LAN and Dialup connection at same time

  • Thread starter Thread starter Harold
  • Start date Start date
H

Harold

I am connected to a LAN at work. I also have access to a Dial up
modem attached to the computer. If I create a Dialup connection, my
connection to the LAN goes dead.

How can I access my Dialup connection and the LAN at the same time?

I looked into creating a Bridge but it's not allowed with Dialup
connections.
 
quoted from http://www.chicagotech.net
Can't access the Internet while using VPN

Symptom: after establishing a VPN connection, you may not be able to access
the Internet because the VPN takes over your existing connection and all
traffic to use the VPN default gateway on the remote network. The remote
network may not allow VPN clients to access the Internet via their gateway.

Resolutions:
1) If you don't need to access the entire VPN resources, disable the "use
default gateway on remote network" option in the properties of the VPN
connection. To do that, go to VPN
Connection->Properties->Network->TCP/IP->Properties->Advanced-, uncheck
"Use default gateway on Remote Network".
2) Edit route table manually if you know how to or check routing page on
this web site.


--
For more and other information, go to http://www.chicagotech.net

Don't send e-mail or reply to me except you need consulting services.
Posting on MS newsgroup will benefit all readers and you may get more help.

Robert Lin, MS-MVP, MCSE & CNE
Networking, Internet, Routing, VPN, Anti-Virus, Tips & Troubleshooting on
http://www.chicagotech.net
This posting is provided "AS IS" with no warranties.
 
Back
Top