Windows Explorer doesn´t recognize my 2nd HD

[Edgard Kniriem]

Hi
I´ve just conected a 2nd HD (Samsung 80 GB). I´ve changed it from another
computer also as a 2nd primary HD and it was O.K. It´s formated NTFS and
working fine. Partition Magic did recognized it. Acronis True Image found it
and I was able to made a Clone from a Seagate 250 GB (only 10% full). The
bios Setup recognize it and after the Clone I could even boot from it
changing the boot sequence in BIOS. Windows Disk Manager show it either.
Then came the problem: Windows Explorer doesn´t show it and Second Copy also
ignores it. I want to configure Second Copy to make exact copies of
everything I do in disk 01, evry thing that change while I´m working at
every 2 hours.
At least I have a clone I can use but I want it exactly as the original.
Any hint?
TIA
Edgard Kniriem





--

 

[Edgard Kniriem]

Thank you Andrew.
I´ve done it but "make active" was greyed. I tried to change the drive
letter and it worked. It appeared either in Windows Explorer and in Second
Copy and I´ve already configured it to work properly.
Thank again
Edgard

 

[Edgard Kniriem]

Thank you Andrew.
I did it but the "make active" msg was greyed than I decided to change the
drive letter and the Disk 2 was recognized. Anyway I learned one more
lesson. Thanks a lot.
Edgard

--