Reply to thread

Message: [QUOTE="Mike J.S., post: 10994699"] Okay, something weird is going on right now. I don't know what triggered it, but I've been doing a lot of troubleshooting lately, before giving up and reformatting my HD. 2407WFP-HC gets no signal on boot-up until Windows is loaded. Only then does it turn on. The screen is connected via DVI (looks noticeably better than VGA). --- Troubleshooting : When I plug a second simultaneous monitor (a BenQ CRT) in the video card's (Asus EN6600GT) VGA slot , BOTH the CRT and the LCD display the full boot-up routine (DOS visuals). And of course, the Windows portion. Leave the VGA slot unplugged (with only the DVI plugged-in), and the whole DOS boot-up routine is bypassed by the monitor again. It gets no signal until Windows is loaded. What gives? [/QUOTE]