IRQ

R

Roger

I am unable to change my IRQ resource setting using the
Device Manager. The box with the check in it will not
enable for the change. Any idea's? Thanks
 
R

Rick \Nutcase\ Rogers

Hi Roger,

Generally, you don't want to do that unless you are troubleshooting a
conflict in your IRQ's. If you are, I'd suggest that you look to the system
BIOS instead. You may find that several IRQ conflicts can be resolved by
moving a PCI card out of the slot next to an AGP card and to a slot further
away. If you are simply concerned about IRQ sharing, then don't be, this is
a normal behavior and is by design.

--
Best of Luck,

Rick Rogers aka "Nutcase" MS-MVP - Win9x
Windows isn't rocket science! That's my other hobby!

Associate Expert - WinXP - Expert Zone
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Similar Threads

SHEARING OF INTERRUPT REQUEST LINE (IRQ) 6
IRQ Issue 2
IRQ conflict 26
IRQs on WinXP Pro 3
Change IRQ assignments 10
Com Ports 12
Cannot Change Resources in Device Manager 2
IRQ sharing - conflict 1

Top