Reply to thread

Message: [QUOTE="Lem, post: 11794403"] Confirm that the Plug and Play service, Network [and Dial-up] Connections service, and Remote Procedure Call (RPC) service are all running. [Start > Run > services.msc (click OK)] If there is no icon showing in Network Connections, it means that: • The network adapter was removed. (A local area connection only appears if an adapter is detected.) • The installed network adapter is malfunctioning. • If your network adapter is a legacy adapter that is not detected by the Add New Hardware wizard or the Plug and Play service, then you might need to set up the adapter manually in Device Manager before you see a local area connection in the Network and Dial-up Connections folder. • If the driver is not recognized, the adapter appears in Device Manager but you cannot see a local area connection. Where did you get the drivers from that you said, "installed Okay"? -- Lem -- MS-MVP To the moon and back with 2K words of RAM and 36K words of ROM. [URL]http://en.wikipedia.org/wiki/Apollo_Guidance_Computer[/URL] [URL]http://history.nasa.gov/afj/compessay.htm[/URL] [/QUOTE]