Failed Routing a VPN


M

M D McNally

Hi

I have just set up a test VPN server which is working fine
connecting to part of my LAN, problem is that my LAN runs
of 4 differnt subnets, how do I set up static routes to
allow VPN traffic to reach all 4 of the subnets and the
internet if I wish?

The VPN clients are getting IP addresses from 1 of the 4
LAN subnets, and they can talk to anything on that subnet,
but not on the other 3.

There is a single default static route configured in RRAS
stating.

Interface: Internet Side
Detination: 0.0.0.0
Mask: 0.0.0.0
Gateway: 192.168.0.1 (the LANs Gateway on that subnet)
Metric: 1

Thanks in advance
 
Ad

Advertisements


Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Similar Threads

VPN routing 6
VPN not Routing 5
VPN fails to route after SP1 is installed 2
VPN routing problems? 1
vpn routing question 1
VPN routing issue 1
Routing through a VPN 7
routing VPN and LAN 2

Top