XP clients were disconnected from accessing mapped drive

H

Han

Hi, I know a lot of you might have come across this issue in AD 2003
before.

Currently I have 12 XP clients connected with AD 2003. Shared drives
were mapped to these clients. After clients logged on, mapped drives
are accessible but disconnected after a while later. I have tried the
following command to disable the autodisconnection still unable to
achieve the objective.

net server /disconnect:-1

Another way I have also tried is to use non-persistent mapping on XP
clients. Still, it works a short while later than back to square
again.

Can any help? Thanks in advanced.
 
J

Jerold Schulman

Hi, I know a lot of you might have come across this issue in AD 2003
before.

Currently I have 12 XP clients connected with AD 2003. Shared drives
were mapped to these clients. After clients logged on, mapped drives
are accessible but disconnected after a while later. I have tried the
following command to disable the autodisconnection still unable to
achieve the objective.

net server /disconnect:-1

Another way I have also tried is to use non-persistent mapping on XP
clients. Still, it works a short while later than back to square
again.

Can any help? Thanks in advanced.

See tip 0019 » Disabling autodisconnect.
in the 'Tips & Tricks' at http://www.jsifaq.com

Jerold Schulman
Windows Server MVP
JSI, Inc.
http://www.jsiinc.com
http://www.jsifaq.com
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Top