Tektronix Phaser 350 Error 04,005:44

M

Mat Lawrence

Hello

I am trying to fix a Phaser 350 with Error 04,005:44
"failure positioning the drum maintenance cam during a drum maintenance
cycle. Check drum maintenance cam solenoid,"

Does any one know how I can fix this?

Thanks

Mat Lawrence
 
O

Oeps

Hi Mat,

On the left side there is the drum encoder wheel.
Try to clean it with water, NO ALCOHOL ! ! !
Also clean the opto-coupler.
 
A

Andre

Hi,
it's the drum maintenance clutch that is bad.
That is a white plactic part with 3 stops on it.
Cleaning the drum encoder will have no effect and you will likely dammage
the encoder or reinstall it improperly.

Good luck.
 
L

LeckyT

Andre said:
Hi,
it's the drum maintenance clutch that is bad.
That is a white plactic part with 3 stops on it.
Cleaning the drum encoder will have no effect and you will likely dammage
the encoder or reinstall it improperly.

Good luck.

If anyone actually finds out how to fix this, can they let me know?
I've got the same problem...

LeckyT
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Top