super slow transfer ide1 to ide 2..TIA

E

EndOf MyRope

Win XP pro - ata133 ide 3 HDDs and one cdrw. Move about
1GB per minute between IDE1 master and slave. Move about
1GB per 7 minutes between IDE1 and HDD on IDE 2. Rplaced
drive. Replaced Power supply. Replaced IDE Cables.
Nothing....HELP oh...btw:
drive0 60gb 7200 2mb cache ata133 (ide1 master cable sel)
drive1 80gb 7200 2mb cache ata133 (ide1 slave cable sel)
drive2 160gb 7200 8mb cache ata133 (ide2 master cable sel)
 
G

Guest

Change the MB/HD.... I have same problem and i replace the HD to 120GB... And it works better... In some old motherboard, it can't run the HD larger than 120GB. Cause lots problem
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Similar Threads

2 DVD drive's config 6
Trouble installing 2nd HDD to IDE Controller Card 2
Boot Problems deeper than I thought 3
Maxtor harddrive will not write at normal speed 1
Partitioning Hard Drive #2 6
Imaging New Master Boot Drive 6
asus a7n8x and redhat 9 with a SATA drive, extremely slow 1
suggestions, opinions, compatibility issues... all wanted here 13

Top