Routing problem in win2k site to site VPN

C

Chiranjeevi

Hi

We are trying to establish win2k site to site VPN between
our 2 offices. We are able to establis the tunnel between
2 vpn servers A & B. From the network behind VPN Server A
we are able to reach the network behind vpn server B
through VPN Tunnel and vice versa. But from the network
behind VPN Server A we are not able to reach any of the
systems which are in the same network of the external
interface of the VPN server B.

Can anyone help reg this.

Thanks
Chiranjeevi
 
B

Bill Grant

It could be a problem with the LAN routing. The RRAS routers will have
routes to the "other" subnet through the VPN connection. But if the RRAS
router is not the default gateway of the local network, the traffic may
never reach the RRAS router.

So if the default gateway of the LAN is some other router, you will need
to add extra routing info to that gateway to "bounce" the traffic to the
RRAS router.
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Similar Threads

Routing problem on Microsoft RAS VPN 0
Site To Site VPN DNS Setup 6
RAS site to site vpn User Authentication 7
Site-to-Site VPN with Win2K 4
failed to modify routing table after VPN connection is establishedthru Routing and RAS 0
VPN server without domain controller 0
VPN From Win2003 to Win2003 Server messes up routing table 0
Client-site & site-site VPN 2

Top