Mushkin XP3-16000 DDR3 and ASUS P6T deluxe V2 motherboard

Discussion in 'Computer Hardware' started by mikem891@hotmail.com, May 11, 2009.

  1. Guest

    Hi, I plan to build a system with an ASUS P6T deluxe V2 motherboard
    (core i7 cpu) and install 6Gig of Mushkin XP3-16000 DDR3 memory. But I
    just want to be sure that this memory will be stable with the P6T
    motherboard.

    I didn't find any datasheet for the XP3-16000 on mushkin's web site
    and this memory is not in the the qualified vendors list of the ASUS
    P6T manual so I really need to know if this memory works well with the
    motherboard

    Mushkin XP3-16000 specs:

    998731 (3x2GB) XP3-16000 Triple Channel Memory Kit

    Frequency: 2000MHz Latency: 8-9-8-24 Parity: Unbuffered
    Voltage: 1.65V Pins: 240
    Density > > > Module: 256x64 Chip: 128x8

    In the ASUS P6T manual, there's many important things to take into
    consideration for compatibility & stability:

    - According to intel spec definition, DIMMS with voltage requirement
    over 1.65V may damage the CPU permanently. We recommand you install
    DIMMs with the voltage requirement below 1.65V

    The mushkin memory voltage it 1.65V but I saw that many memory
    modules in the qualified vendor list are 1.65V. So I guess the mushkin
    would be ok, or should I go with memory using less than 1.65V?

    - This motherboard does not support DIMMs made up of 256 megabit (Mb)
    chips or less

    I'm not sure where to find it in the Mushkin spec, is it 128x8? so
    1024 Megabit?

    - The memory must be unbuffered and non-ECC

    At this price I guess that the Mushkin memory is non-ECC (I didn't
    find the information). I'm I right?

    Anyone used this memory with the P6T? or know if they work well
    together? Any comments or even suggestions would be greatly
    appreciated. Even a better memory choice could be useful. But I really
    like Mushkin and always used it.

    I also have some questions concerning other Mushkin memories:

    At first I was going to buy the XP3-15000 memory which is cheaper but
    it works at a maximum of 1866 Mhz, the XP3-16000 works at 2000 Mhz.
    Will it make a noticiable difference?

    I also considered the REDLINE XP3-15000 which is a lot more expensive
    (100$ more) but has a better latency 7-7-6-20 (but it's 1866Mhz). If
    money is not really a problem, will this memory modules make a big
    difference? or would I throw my money away? And I'm confused is it
    better to have a latency of 8-9-8-24 (at 2000Mhz) or 7-7-6-20 (at
    1866Mhz)?

    Thanks in advance
     
    , May 11, 2009
    #1
    1. Advertisements

Want to reply to this thread or ask your own question?

It takes just 2 minutes to sign up (and it's free!). Just click the sign up button to choose a username and then you can ask your own questions on the forum.
Similar Threads
  1. someone

    kingston hyperx pc3200 vs mushkin blue pc3200

    someone, Aug 17, 2003, in forum: Computer Hardware
    Replies:
    1
    Views:
    506
    someone
    Aug 18, 2003
  2. DW

    Mushkin PC3200 1Gb Dual Packs from Fry's

    DW, Sep 23, 2003, in forum: Computer Hardware
    Replies:
    3
    Views:
    369
    David Maynard
    Sep 24, 2003
  3. MarkW
    Replies:
    3
    Views:
    616
    Graeme
    Feb 11, 2004
  4. Synapse Syndrome

    Asus P5W DH Deluxe motherboard with Vista and TV-cards

    Synapse Syndrome, Nov 18, 2006, in forum: Computer Hardware
    Replies:
    2
    Views:
    202
    Synapse Syndrome
    Nov 19, 2006
  5. Sjouke Burry

    Re: P6T Deluxe V2 (DDR3-1066MHz) computer memory

    Sjouke Burry, Jan 7, 2010, in forum: Computer Hardware
    Replies:
    0
    Views:
    332
    Sjouke Burry
    Jan 7, 2010
Loading...

Share This Page