How are you installing? To do a clean install, either boot the Windows 2000
install CD-Rom or setup disks. The set of four install disks can be created
from your Windows 2000 CD-Rom; change to the \bootdisk directory on the
CD-Rom and execute makeboot.exe (from dos) or makebt32.exe (from 32 bit) and
follow the prompts.
Setup inspects your computer's hardware configuration and then begins to
install the Setup and driver files. When the Windows 2000 Professional
screen appears, press ENTER to set up Windows 2000 Professional.
Read the license agreement, and then press the F8 key to accept the terms of
the license agreement and continue the installation.
When the Windows 2000 Professional Setup screen appears, all the existing
partitions and the unpartitioned spaces are listed for each physical hard
disk. Use the ARROW keys to select the partitions Press D to delete an
existing partition, If you press D to delete an existing partition, you must
then press L (or press ENTER, and then press L if it is the System
partition) to confirm that you want to delete the partition. Repeat this
step for each of the existing partitions When all the partitions are deleted
press F3 to exit setup, (to avoid unexpected drive letter assignments with
your new install) then restart the pc then when you get to this point in
setup again select the unpartitioned space, and then press C to create a new
partition and specify the size (if required). Windows will by default use
all available space.
Be sure to apply these to your new install before connecting to any network.
http://download.microsoft.com/download/E/6/A/E6A04295-D2A8-40D0-A0C5-241BFECD095E/W2KSP4_EN.EXE
http://www.microsoft.com/technet/security/bulletin/MS03-043.mspx
http://www.microsoft.com/technet/security/bulletin/MS03-049.mspx
Then
Rollup 1 for Microsoft Windows 2000 Service Pack 4
http://www.microsoft.com/downloads/...CF-8850-4531-B52B-BF28B324C662&displaylang=en
Failing this remove all non-essential hardware and try again. Check the pc
or mobo manufacturer's web site for an updated bios.
--
Regards,
Dave Patrick ....Please no email replies - reply in newsgroup.
Microsoft Certified Professional
Microsoft MVP [Windows]
http://www.microsoft.com/protect
:
| my windows 2000 installation was corrupt.
|
| it was giving me the NTLDR missing press CTRL+ATL+DEL message.
|
| i tried reparing it but it was of no use. so i did a fresh install.
|
| here everything went fine but it is getting stuck on the screen where it
| registers the components. ( start menu went fine).
|
| can anybody please help me.
| i am using the NTFS file system.
|
| regards
|
