floppy drive does not appear in XP device manager

W

who?

So .. I connected the IDE floppy drive's data and power cables and booted
up. Unfortunately the drive did not appear in device manager, or,of course,
not in My computer either.

This old floppy drive has something like 6 jumper setting, damned if I know
which should be set. It is set now as it was in the old computer.

Do I need to do something in the BIOS rather than set the jumpers?
 
W

who?

Brian Cryer said:
Go to the BIOS and somewhere there you need to tell it that you have a
floppy drive attached at the type of floppy drive (almost certainly
1.44MB).

No idea about jumpers, I don't recall any on any of the floppy drives I've
used.

Thanks Brian, I'll take a look in the BIOS next time I am visiting this
computer.
Regarding the inclusion of jumpers on this FDD, it also has what looks very
much like a flywheel exposed on the PCB side. I don't remember seeing that
before, but it's along time since I bothered to look at an FDD. Maybe this
one is out of the ark!
 
G

Grinder

who? said:
Thanks Brian, I'll take a look in the BIOS next time I am visiting this
computer.
Regarding the inclusion of jumpers on this FDD, it also has what looks very
much like a flywheel exposed on the PCB side. I don't remember seeing that
before, but it's along time since I bothered to look at an FDD. Maybe this
one is out of the ark!

It's really an *IDE* floppy drive? I've seen internal zip drives that
use the IDE channel, but not a 1.44MB floppy drive. Depending on how
the cables are keyed you can actually plug a floppy drive into an IDE
channel, but it obviously will not work.
 
W

who?

philo said:
Good catch...
I missed the part where he said IDE

Maybe it's a zip drive or a floptical or LS-120

Maybe I am mistaken calling it an IDE floppy drive ... when what I mean is
it was connected to and is now connected to a motherboard that has none of
that SATA stuff. It definately is a floppy disk drive of the 1.44 MB
variety. There are many web pages which mention jumper settings on floppy
disk drives, but I have no idea of the manufacturer of this one as none of
what could have been identifying numbers turn up on a web search. .. I think
you guys will be right about the BIOS though ..
 
S

Sjouke Burry

who? said:
Thanks Brian, I'll take a look in the BIOS next time I am visiting this
computer.
Regarding the inclusion of jumpers on this FDD, it also has what looks very
much like a flywheel exposed on the PCB side. I don't remember seeing that
before, but it's along time since I bothered to look at an FDD. Maybe this
one is out of the ark!
That is a very flat motor driving the floppy disk around.
 
S

Sjouke Burry

who? said:
Maybe I am mistaken calling it an IDE floppy drive ... when what I mean is
it was connected to and is now connected to a motherboard that has none of
that SATA stuff. It definately is a floppy disk drive of the 1.44 MB
variety. There are many web pages which mention jumper settings on floppy
disk drives, but I have no idea of the manufacturer of this one as none of
what could have been identifying numbers turn up on a web search. .. I think
you guys will be right about the BIOS though ..
If the flatcable is the wrong way around, the drive LED will
be always on.
So check on both sides, where pin 1 is located.
 
G

Grinder

who? said:
Maybe I am mistaken calling it an IDE floppy drive ... when what I mean is
it was connected to and is now connected to a motherboard that has none of
that SATA stuff. It definately is a floppy disk drive of the 1.44 MB
variety. There are many web pages which mention jumper settings on floppy
disk drives, but I have no idea of the manufacturer of this one as none of
what could have been identifying numbers turn up on a web search. .. I think
you guys will be right about the BIOS though ..

There shouldn't be any jumper on the floppy that *you* need to
configure. The only selector is if the drive is an A or B drive, and
that's done by the cable.

While I'm on about cables: if you still can't get the drive to show up
after setting your BIOS and double-checking your cable connection, try a
different cable. Maybe it's just a weird statistical thing, but almost
of the cables I have had "go bad" were floppy cables.
 
P

PeeCee

who? said:
So .. I connected the IDE floppy drive's data and power cables and booted
up. Unfortunately the drive did not appear in device manager, or,of
course, not in My computer either.

This old floppy drive has something like 6 jumper setting, damned if I
know which should be set. It is set now as it was in the old computer.

Do I need to do something in the BIOS rather than set the jumpers?



Floppy drives use a 'floppy drive' cable not IDE:
See: http://www.pcguide.com/ref/fdd/confCable-c.html
A Floppy cable has 34 conductors, IDE has 40.

You do not state if it is a 5.25" or 3.5" floppy disk.

3.5" drives usually did not have any jumpers on them as they relied on the
twist in the cable to select A or B drive.
5.25" drives often had jumpers on them, the earlier the drive the more
jumpers, not necessarily related to drive ID.

The only other possibility is if it does have an IDE connector then it is
more likely a Zip or LS120 drive (100=MB)
These require drivers to be seen properly by Windows, and you will have to
refer to the manual for jumper settings.

Best
Paul.
 
W

who?

PeeCee said:
Floppy drives use a 'floppy drive' cable not IDE:
See: http://www.pcguide.com/ref/fdd/confCable-c.html
A Floppy cable has 34 conductors, IDE has 40.

Thanks for the clarification
You do not state if it is a 5.25" or 3.5" floppy disk.

IT's 3.5
3.5" drives usually did not have any jumpers on them as they relied on the
twist in the cable to select A or B drive.

There are two different and opposite cables in a Computer with two floppy
drives?
5.25" drives often had jumpers on them, the earlier the drive the more
jumpers, not necessarily related to drive ID.

The only other possibility is if it does have an IDE connector then it is
more likely a Zip or LS120 drive (100=MB)
These require drivers to be seen properly by Windows, and you will have to
refer to the manual for jumper settings.

Best
Paul.

It's definitely a 3.5 Floppy Disk Drive with jumper settings ..
It has two rows of 6 jumpers marked
0, 1, 2, 3, DS, DC, RY (7 labels next to 6 jumpers !?)
I, F, H, D, (I can't make out the others .. there seems to be more than 6
labels on this row also)
Three of the jumpers are set.
I have no manual for it, and the potential ID numbers at various places
don't turn up on he web. SO I can't identify it to find a manual for it.

It's only fit for the bin! or as a museum piece perhaps.
thanks to all for replies.
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Top