R
Romi
I'd like to request some information about ATA RAID
controller on PCI bus testing with Windows Server 2003
Enterprise Edition.
According to test procedure "Windows HCT 11.2-Storage
Controller/Device-->Raid Device-->Raid Controller -->RAID
controller Windows .NET Enterprise Server ",there is an
item "Crashdump Support test".and I had
1. Installed the Microsoft Debugging Tools for
Windows locally in C:\Debuggers\ (dbg_x86_6.2.13.1.exe)
2. Installed the Windows Server 2003 symbol files in
C:\Symbols (Windows2003.x86.fre.rtm.symbols.exe)
but the result was still fail. The error messages are
many " (x) Processor 0 data verification failed."
I was using
Intel P4 1.6A 512/400/1.5V L209A701-1524 or
Intel P4 1.7 256/400/1.75V L207A533-0120 ,
DDR RAM was over 256MB.
How should I do?
Thanks a lot!
controller on PCI bus testing with Windows Server 2003
Enterprise Edition.
According to test procedure "Windows HCT 11.2-Storage
Controller/Device-->Raid Device-->Raid Controller -->RAID
controller Windows .NET Enterprise Server ",there is an
item "Crashdump Support test".and I had
1. Installed the Microsoft Debugging Tools for
Windows locally in C:\Debuggers\ (dbg_x86_6.2.13.1.exe)
2. Installed the Windows Server 2003 symbol files in
C:\Symbols (Windows2003.x86.fre.rtm.symbols.exe)
but the result was still fail. The error messages are
many " (x) Processor 0 data verification failed."
I was using
Intel P4 1.6A 512/400/1.5V L209A701-1524 or
Intel P4 1.7 256/400/1.75V L207A533-0120 ,
DDR RAM was over 256MB.
How should I do?
Thanks a lot!