| From: "LD" <
[email protected]>
| Sender: "LD" <
[email protected]>
| Subject: CPU max out @ 100% high mem useage. due to Services.exe
| Date: Thu, 24 Jun 2004 04:15:03 -0700
|
| CPU is maxed out at 100% due to services.exe. Memory
| useage is also high. Whole system very slow as a result.
|
| How do I get services back to a normal condition - its
| running at 97% and have tried reucing priority - no luck.
|
Hi LD,
Does this still happen in "safe mode" (select F8 at boot)?
Does this happen with the network cable unplugged?
Is there a Drwtsn.log available.
Please let me know on these questions....
Also.... this is the trouble shooting to identify the culpret... and to get
some relief.
STEP 1.
We need to get a file from an XP machine called "MSconfig.exe" and copy it
to the 2000 server.
It is located in XP at this location C:\windows\pchealth\helpctr\binaries...
- copy this file to the desktop of the server
- launch it
- at the last tab at the top of the "MSconfig window" please goto the
"startup" tab
- select the "disable all" button
- select "apply" then "ok"
- it will require you to "restart" select "ok"
- when the server comes up to the desktop.... it will present you with
MSconfig again (close it)
- then we must reboot again, this time to test if it was a startup item
causing the issue.....
If this was successful.... then it is determined that it is a "startup
item" causing the issue.
(If no change after "all startup items" are all disabled, proceed to step
2.)
The next step is to begin to re-enable the "startup items" again until the
logoff hangs start occure.
- launch "MSconfig" again
- goto "startup" tab again, and start manually enabling with "check marks"
one group of items at a time.
(ie enable all items related to antivirus etc....) until we can identify
what startup item is causing the issue.
- to test which item is causing the issue, a reboot after each change is
required.
STEP 2.
- launch "MSconfig"
- goto the "services tab"
- at the bottom of the window put a "check" in the checkbox for "hide all
Microsoft services"
- then select "disable all" button
- select "apply" then "ok"
- it will require you to "restart" select "ok"
- when the server comes up to the desktop.... it will present you with
MSconfig again (close it)
- then we must reboot again, this time to test if it was a 3rd party
service causing the issue.....
If this was successful.... then it is determined that it is a "3rd party
service" causing the issue.
(If no change after "all 3rd party services" are all disabled, proceed to
step 3.)
The next step is to begin to re-enable the "3rd party services" again until
the logoff delays start occure.
- launch "MSconfig" again
- goto "startup" tab again, and start manually enabling with "check marks"
one group of "3rd party services" at a time.
(ie enable all items related to antivirus etc....) until we can identify
what "3rd party services" are causing the issue.
- to test which service is causing the issue, a reboot after each change is
required.
STEP 3.
If none of these steps have identified the cupret, then we must return your
system back to
its original state.
- Launch "MSconfig"
- at the last tab at the top of the "MSconfig window" please goto the
"startup" tab
- select the "enable all" button
- goto the "services tab"
- at the bottom of the window remove the "check" in the checkbox for "hide
all Microsoft services"
- then select "enable all" button
- select "apply" then "ok"
- it will require you to "restart" select "ok"
- when the server comes up to the desktop.... it will present you with
MSconfig again (remove the check mark to show every time, then slect "ok"
to close.
Now your system is back to where you started.
Please let me know what you have found out.
Thanks
~~ Mark Brown ~~
~ Performance Support Specialist,
~ Microsoft Enterprise Platforms Support
~ This posting is provided "AS IS" with no warranties, and confers no
rights.
~ Use of included script samples are subject to the terms specified at
http://www.microsoft.com/info/cpyright.htm
~ Note: For the benefit of the community-at-large, all responses to this
message are best directed to the newsgroup/thread from which they
originated.
