Cannot start SSDP or UPNP

G

Guest

Hello,

I want to enable Universal Plu and Play so I can use some upload software
that came with my new

Canon A710IS digital camera.

Going into services.msf,I cannot start Univeral Plug and Play. Because it
depends on SSDP.

SSDP Discovery Service is disabled, and when I set it to manual or Auto I
get an Access is Denied

Error Message.

Event Manager shows this message:
Event ID 7006: The ScRegSetValueExW call failed for Start with the following
error:
Access is denied.

Microsoft Help Center displays this:

Explanation
The service controller could not set a registry entry's value for a function
that it requires for

operation.

Can anyone suggest a resolution? Thanks in advance.
 
G

Guest

Mark,

For the most part, your uggestion worked - I can now use my Canon software.

I followed the instructions for the SUBINACL tool and pasted in the
reset.cmd file and ran it. It took several minutes - was at line 85,500 when
I left and came back later it was done.

First, I still could not change SSDP from DISABLE. Nor could I start UPNP.
Then I tried to set the log in tab on SSDP from "this account" to local
system account and it hung up the machine.

I had to power off and reboot and tried to change the SSDP service again and
still got "Access is Denied". I tried again to change to log on andit hung
again.

I rebooted again and this time to my surprise SSDP was running, already set
to Automatic.

I could not start UPNP, this time getting this error message:
Error 1079 the account specified for this service is different fom the
account specified for other services rnning in the same process.

The event log show this: Eventid 7000
The Universal Plug and Play Device Host service failed to start due to the
following error:
The account specified for this service is different from the account
specified for other services running in the same process.

But I tried my Digital Camera upload anyway, and this time it DID work!

So I am deeply greatful for your help, tough I still don't understand why I
cannot start the uPNP service. The logon for UPNP is local system account. If
I change it to be NT AUTHORITY\LocalService I have no idea what to enter for
the password.

Thanks for any addtl help you can provide.

- Steve
 
W

WTC

SteveL said:
Hello,

I want to enable Universal Plu and Play so I can use some upload
software that came with my new

Canon A710IS digital camera.

Going into services.msf,I cannot start Univeral Plug and Play.
Because it depends on SSDP.

SSDP Discovery Service is disabled, and when I set it to manual or
Auto I get an Access is Denied

Error Message.

Event Manager shows this message:
Event ID 7006: The ScRegSetValueExW call failed for Start with the
following error:
Access is denied.

Hi SteveL,

Have you ever tried to Start the SSDP Discovery Service before?

Anyways, take a look at this KB article:

Some services may not start when you upgrade a computer to Windows XP
Service Pack 2 or to Windows Server 2003 Service Pack 1
http://support.microsoft.com/kb/926078
 
G

Guest

SteveL said:
Mark,

For the most part, your uggestion worked - I can now use my Canon software.

I followed the instructions for the SUBINACL tool and pasted in the
reset.cmd file and ran it. It took several minutes - was at line 85,500 when
I left and came back later it was done.

First, I still could not change SSDP from DISABLE. Nor could I start UPNP.
Then I tried to set the log in tab on SSDP from "this account" to local
system account and it hung up the machine.

I had to power off and reboot and tried to change the SSDP service again and
still got "Access is Denied". I tried again to change to log on andit hung
again.

I rebooted again and this time to my surprise SSDP was running, already set
to Automatic.

I could not start UPNP, this time getting this error message:
Error 1079 the account specified for this service is different fom the
account specified for other services rnning in the same process.

The event log show this: Eventid 7000
The Universal Plug and Play Device Host service failed to start due to the
following error:
The account specified for this service is different from the account
specified for other services running in the same process.

But I tried my Digital Camera upload anyway, and this time it DID work!

So I am deeply greatful for your help, tough I still don't understand why I
cannot start the uPNP service. The logon for UPNP is local system account. If
I change it to be NT AUTHORITY\LocalService I have no idea what to enter for
the password.

Thanks for any addtl help you can provide.

- Steve

FURTHER UPDATE - I now get the BSOD on NV4_DISP on bootup
am in safe mode now getting new navidia drivers
 
M

Mark L. Ferguson

All of these problems seem to point at hard disk corruption. I suggest doing
"Error Checking" and then Defragmentation.

(Rightclick the drive icon, Properties, tools menu, error check.,
after restart, defrag is on start/.../system tools)
 
G

Guest

Mark L. Ferguson said:
All of these problems seem to point at hard disk corruption. I suggest doing
"Error Checking" and then Defragmentation.

(Rightclick the drive icon, Properties, tools menu, error check.,
after restart, defrag is on start/.../system tools)

--
Mark L. Ferguson
e-mail subject line must include "QZ" or it's deleted
..



I have gone back to 2005 versions of NVIDIA drivers and now my system appears to be stable. Thanks for your help
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Top