Hello There!
One of my friend connects to his school computer network via
dial-up-networking, and he complains about getting slow last night. I
asked him about his routing table which is as follows:
Route Table
===========================================================================
Interface List
0x1 ........................... MS TCP Loopback interface
0x600xx ...00 xx xx xx xx 00 ...... WAN (PPP/SLIP) Interface
===========================================================================
===========================================================================
Active Routes:
Network Destination Netmask Gateway Interface
Metric
0.0.0.0 0.0.0.0 192.168.0.100 192.168.0.100
1
127.0.0.0 255.0.0.0 127.0.0.1 127.0.0.1
1
192.168.0.1 255.255.255.255 192.168.0.100 192.168.0.100
1
192.168.0.100 255.255.255.255 127.0.0.1 127.0.0.1
50
192.168.0.255 255.255.255.255 192.168.0.100 192.168.0.100
50
20x.0.0.0 20x.0.0.0 192.168.0.100 192.168.0.100
1
255.255.255.255 255.255.255.255 192.168.0.100 192.168.0.100
1
Default Gateway: 192.168.0.100
===========================================================================
Persistent Routes:
None
What has gone wrong with his routing table? Why on earth he gets
20x.x.x.x network?
Thanks in advance.
Raqueeb Hassan
Bangladesh
|