I am trying to captue analog video through my Radeon RX70 XT-256PCIE graphic
card vi a 9 pin VIVO olug with S-video and composite video/sound capture.
The sound is captured fine but I am getting a 'Capture device not detected
message'
This is a new machine 3.2 GB Intek processor with all patches and updates
installed.

Does anybody have any ideas??

Movie maker works best with digital firewire devices. Diod the card come
with it's own capture software, if so use this, if not look on their site.

--
Graham Hughes
MVP Digital Media
Laird of Glencairn
www.dvds2treasure.com
www.simplydv.com


"brumar" <(E-Mail Removed)> wrote in message
news:8B67BB4D-E721-4998-BD8C-(E-Mail Removed)...
> I am trying to captue analog video through my Radeon RX70 XT-256PCIE
graphic
> card vi a 9 pin VIVO olug with S-video and composite video/sound capture.
> The sound is captured fine but I am getting a 'Capture device not detected
> message'
> This is a new machine 3.2 GB Intek processor with all patches and updates
> installed.
>
> Does anybody have any ideas??

Hi Graham!

There is no SW available on their site. and their card is built up around
the 9 plug ViVO system. It is as if the machine does not identify that I am
adding and external piece of HW (the Camera) and therefore MovieMaker does
not find the signal.

Thanks

Bruce

"Graham Hughes" wrote:

> Movie maker works best with digital firewire devices. Diod the card come
> with it's own capture software, if so use this, if not look on their site.
>
> --
> Graham Hughes
> MVP Digital Media
> Laird of Glencairn
> www.dvds2treasure.com
> www.simplydv.com
>
>
> "brumar" <(E-Mail Removed)> wrote in message
> news:8B67BB4D-E721-4998-BD8C-(E-Mail Removed)...
> > I am trying to captue analog video through my Radeon RX70 XT-256PCIE
> graphic
> > card vi a 9 pin VIVO olug with S-video and composite video/sound capture.
> > The sound is captured fine but I am getting a 'Capture device not detected
> > message'
> > This is a new machine 3.2 GB Intek processor with all patches and updates
> > installed.
> >
> > Does anybody have any ideas??
>
>
>

If you're using an ATI VIVO card for analog capture, you should use the ATI
MultiMedia Center software that comes with the card (or can be downloaded
from their website).
--
Cari (MS-MVP) Windows Client - Printing/Imaging and Hardware
www.coribright.com

"brumar" <(E-Mail Removed)> wrote in message
news:8B67BB4D-E721-4998-BD8C-(E-Mail Removed)...
>I am trying to captue analog video through my Radeon RX70 XT-256PCIE
>graphic
> card vi a 9 pin VIVO olug with S-video and composite video/sound capture.
> The sound is captured fine but I am getting a 'Capture device not detected
> message'
> This is a new machine 3.2 GB Intek processor with all patches and updates
> installed.
>
> Does anybody have any ideas??
>