I had to format my HD due to a virus and other problems. I
installed XP but I want to install 2000 again. When the
2000 Setup starts, I get a popup that says that its an
older version than the one installed. I've tried the
Add/Remove Programs, and there is nothing in the list.
Any way that I can "downgrade" to 2000?

<(E-Mail Removed)> wrote in message
news:173f01c499d8$a37cb060$(E-Mail Removed)...
>I had to format my HD due to a virus and other problems. I
> installed XP but I want to install 2000 again. When the
> 2000 Setup starts, I get a popup that says that its an
> older version than the one installed. I've tried the
> Add/Remove Programs, and there is nothing in the list.
> Any way that I can "downgrade" to 2000?

have you tried format c:?

The Windows 2000 CD is bootable and contains all the tools necessary
to partition and format your drive. Follow this procedure and allow
Windows 2000 to partition and format your drive:

NOTE: It would be best to physically disconnect all your peripheral hardware
devices, except the monitor, mouse and keyboard, before installing W2K.

NOTE: If you have an internal Zip Drive installed, physically disconnect the
EIDE and power cable to it before proceeding, otherwise your main
hard drive may not be assigned the customary C: drive letter.
After installing Windows 2000, you may then reconnect it.

1. Open your BIOS and set your "CD Drive as the first bootable device".

===> Accessing Motherboard BIOS
===> http://www.michaelstevenstech.com/bios_manufacturer.htm

2. Insert your Windows 2000 CD in the CD Drive and reboot your computer.
3. You'll see a message to boot to the CD....follow the instructions.
4. The setup menu will appear and you should elect to delete all the existing
Windows partitions, then create a new partition, then format the primary
partition (preferably NTFS) and proceed to install Windows 2000.

5. Clean Install Windows
http://michaelstevenstech.com/cleanxpinstall.html

[Courtesy of Michael Stevens, MS-MVP]

6. After Windows 2000 is installed, visit the Windows Update website
and download the available "Critical Updates", begining with SP4.

7. After installing the critical updates, be sure and visit the support website
of the manufacturer of the computer to download and install any
available Windows 2000 compatible drivers, such as video adapter
and audio drivers.

--
Carey Frisch
Microsoft MVP
Windows XP - Shell/User

Be Smart! Protect Your PC!
http://www.microsoft.com/athome/secu...t/default.aspx

-----------------------------------------------------------------------

"Anonymous" wrote:

| I had to format my HD due to a virus and other problems. I
| installed XP but I want to install 2000 again. When the
| 2000 Setup starts, I get a popup that says that its an
| older version than the one installed. I've tried the
| Add/Remove Programs, and there is nothing in the list.
| Any way that I can "downgrade" to 2000?

(E-Mail Removed) wrote:
> I had to format my HD due to a virus and other problems. I
> installed XP but I want to install 2000 again. When the
> 2000 Setup starts, I get a popup that says that its an
> older version than the one installed. I've tried the
> Add/Remove Programs, and there is nothing in the list.
> Any way that I can "downgrade" to 2000?


There is no "rollback" to Win2K. To replace WinXP with an earlier
OS, you'll have to boot from the appropriate boot disk, format the
hard drive, and install. There is no supported downgrade path or
technique. Additionally, there is no supported upgrade or downgrade
path to migrate between a workstation OS and a server OS, in either
direction. A clean installation is required.

Simply boot from the Win2K installation CD. You'll be offered the
opportunity to delete, create, and/or format the system partition as
part of the installation process. (You may need to re-arrange the
order of boot devices in the PC's BIOS to boot from the CD.)

--

Bruce Chambers

Help us help you:
http://dts-l.org/goodpost.htm
http://www.catb.org/~esr/faqs/smart-questions.html

You can have peace. Or you can have freedom. Don't ever count on
having
both at once. - RAH

I tried booting from the w2k disk but I get a DISK BOOT
FAILURE. Any thoughts?

(E-Mail Removed) wrote:
> I tried booting from the w2k disk but I get a DISK BOOT
> FAILURE. Any thoughts?

Make sure you don't have a floppy disk in the floppy drive, and that you
bios is set to boot CD before hard drive.

The steps for 2000 are essentially the same as installing XP.
See the link below.
You boot from the CD and do a clean install.
Click on or copy and paste the link below into your web browser address bar.
How to clean install XP.
http://michaelstevenstech.com/cleanxpinstall.html
--
Michael Stevens MS-MVP XP
(E-Mail Removed)
http://michaelstevenstech.com
For a better newsgroup experience. Setup a newsreader.
http://michaelstevenstech.com/outloo...snewreader.htm