Hi There;

Please help me?
I already connected to RAS but I unable to connect internet or cannot browse
internet.
RAS is in Windows 2000 Server. On the server side, I can see that I'm
connected. But how come I cannot browse Internet?
What else do you think is lacking with my config?

Thanks a lot.

You may try to uncheck use default gateway on the remote network. this link may help,

routing issues on vpn
Can't access the internal server when remote client establishes VPN Can't access
the Internet while using VPN Can't access the remote network after ...
www.chicagotech.net/routingissuesonvpn.htm

Bob Lin, MS-MVP, MCSE & CNE
Networking, Internet, Routing, VPN Troubleshooting on http://www.ChicagoTech.net
How to Setup Windows, Network, VPN & Remote Access on http://www.HowToNetworking.com
"WQC" <(E-Mail Removed)> wrote in message news:A57FEECF-1B1D-407C-88D0-(E-Mail Removed)...
Hi There;

Please help me?
I already connected to RAS but I unable to connect internet or cannot browse
internet.
RAS is in Windows 2000 Server. On the server side, I can see that I'm
connected. But how come I cannot browse Internet?
What else do you think is lacking with my config?

Thanks a lot.

Hi Robert;

Thanks for your reply but still won't work.
Do I need to have 2 NIC in my RAS server?
On client side, when I'm connected to RAS this is the IPconfig,
IPAddress: 169.254.224.28
Subnet: 255.255.255.255
Default Gateway: 169.254.224.28
DNS Servers: 128.128.145.11, 128.128.145.12
Why I cannot browse (intenet,ping,network) from client side?
By the way, in our LAN we have proxy...the address is 128.128.145.5 and
gateway is 128.128.145.2..
Please advise.

Regards,
Walter

"Robert L [MS-MVP]" wrote:

> You may try to uncheck use default gateway on the remote network. this link may help,
>
> routing issues on vpn
> Can't access the internal server when remote client establishes VPN Can't access
> the Internet while using VPN Can't access the remote network after ...
> www.chicagotech.net/routingissuesonvpn.htm
>
> Bob Lin, MS-MVP, MCSE & CNE
> Networking, Internet, Routing, VPN Troubleshooting on http://www.ChicagoTech.net
> How to Setup Windows, Network, VPN & Remote Access on http://www.HowToNetworking.com
> "WQC" <(E-Mail Removed)> wrote in message news:A57FEECF-1B1D-407C-88D0-(E-Mail Removed)...
> Hi There;
>
> Please help me?
> I already connected to RAS but I unable to connect internet or cannot browse
> internet.
> RAS is in Windows 2000 Server. On the server side, I can see that I'm
> connected. But how come I cannot browse Internet?
> What else do you think is lacking with my config?
>
> Thanks a lot

Try putting the proxy settings into the dialup connection properties of the
client. You do this from the internet Options icon in Control Panel. Click
the Connections tab then select the dialup connection, then settings.

WQC wrote:
> Hi Robert;
>
> Thanks for your reply but still won't work.
> Do I need to have 2 NIC in my RAS server?
> On client side, when I'm connected to RAS this is the IPconfig,
> IPAddress: 169.254.224.28
> Subnet: 255.255.255.255
> Default Gateway: 169.254.224.28
> DNS Servers: 128.128.145.11, 128.128.145.12
> Why I cannot browse (intenet,ping,network) from client side?
> By the way, in our LAN we have proxy...the address is 128.128.145.5
> and gateway is 128.128.145.2..
> Please advise.
>
> Regards,
> Walter
>
> "Robert L [MS-MVP]" wrote:
>
>> You may try to uncheck use default gateway on the remote network.
>> this link may help,
>>
>> routing issues on vpn
>> Can't access the internal server when remote client establishes VPN
>> Can't access
>> the Internet while using VPN Can't access the remote network after
>> ...
>> www.chicagotech.net/routingissuesonvpn.htm
>>
>> Bob Lin, MS-MVP, MCSE & CNE
>> Networking, Internet, Routing, VPN Troubleshooting on
>> http://www.ChicagoTech.net
>> How to Setup Windows, Network, VPN & Remote Access on
>> http://www.HowToNetworking.com "WQC"
>> <(E-Mail Removed)> wrote in message
>> news:A57FEECF-1B1D-407C-88D0-(E-Mail Removed)... Hi There;
>>
>> Please help me?
>> I already connected to RAS but I unable to connect internet or
>> cannot browse internet.
>> RAS is in Windows 2000 Server. On the server side, I can see that
>> I'm connected. But how come I cannot browse Internet?
>> What else do you think is lacking with my config?
>>
>> Thanks a lot

Do you know why your dialup client is getting an APIPA (169.254.x.y)
address? Is the RRAS server set to use DHCP for this or have you set up a
static pool of addresses?

Bill Grant wrote:
> Try putting the proxy settings into the dialup connection properties
> of the client. You do this from the internet Options icon in Control
> Panel. Click the Connections tab then select the dialup connection,
> then settings.
> WQC wrote:
>> Hi Robert;
>>
>> Thanks for your reply but still won't work.
>> Do I need to have 2 NIC in my RAS server?
>> On client side, when I'm connected to RAS this is the IPconfig,
>> IPAddress: 169.254.224.28
>> Subnet: 255.255.255.255
>> Default Gateway: 169.254.224.28
>> DNS Servers: 128.128.145.11, 128.128.145.12
>> Why I cannot browse (intenet,ping,network) from client side?
>> By the way, in our LAN we have proxy...the address is 128.128.145.5
>> and gateway is 128.128.145.2..
>> Please advise.
>>
>> Regards,
>> Walter
>>
>> "Robert L [MS-MVP]" wrote:
>>
>>> You may try to uncheck use default gateway on the remote network.
>>> this link may help,
>>>
>>> routing issues on vpn
>>> Can't access the internal server when remote client establishes VPN
>>> Can't access
>>> the Internet while using VPN Can't access the remote network after
>>> ...
>>> www.chicagotech.net/routingissuesonvpn.htm
>>>
>>> Bob Lin, MS-MVP, MCSE & CNE
>>> Networking, Internet, Routing, VPN Troubleshooting on
>>> http://www.ChicagoTech.net
>>> How to Setup Windows, Network, VPN & Remote Access on
>>> http://www.HowToNetworking.com "WQC"
>>> <(E-Mail Removed)> wrote in message
>>> news:A57FEECF-1B1D-407C-88D0-(E-Mail Removed)... Hi There;
>>>
>>> Please help me?
>>> I already connected to RAS but I unable to connect internet or
>>> cannot browse internet.
>>> RAS is in Windows 2000 Server. On the server side, I can see that
>>> I'm connected. But how come I cannot browse Internet?
>>> What else do you think is lacking with my config?
>>>
>>> Thanks a lot

I already tried before putting the proxy settings into dialup connection
properties but it is still not working.
The RRAS server is set to DHCP. I also tried putting up static pool of
addresses but still not working..

"Bill Grant" wrote:

> Do you know why your dialup client is getting an APIPA (169.254.x.y)
> address? Is the RRAS server set to use DHCP for this or have you set up a
> static pool of addresses?
>
> Bill Grant wrote:
> > Try putting the proxy settings into the dialup connection properties
> > of the client. You do this from the internet Options icon in Control
> > Panel. Click the Connections tab then select the dialup connection,
> > then settings.
> > WQC wrote:
> >> Hi Robert;
> >>
> >> Thanks for your reply but still won't work.
> >> Do I need to have 2 NIC in my RAS server?
> >> On client side, when I'm connected to RAS this is the IPconfig,
> >> IPAddress: 169.254.224.28
> >> Subnet: 255.255.255.255
> >> Default Gateway: 169.254.224.28
> >> DNS Servers: 128.128.145.11, 128.128.145.12
> >> Why I cannot browse (intenet,ping,network) from client side?
> >> By the way, in our LAN we have proxy...the address is 128.128.145.5
> >> and gateway is 128.128.145.2..
> >> Please advise.
> >>
> >> Regards,
> >> Walter
> >>
> >> "Robert L [MS-MVP]" wrote:
> >>
> >>> You may try to uncheck use default gateway on the remote network.
> >>> this link may help,
> >>>
> >>> routing issues on vpn
> >>> Can't access the internal server when remote client establishes VPN
> >>> Can't access
> >>> the Internet while using VPN Can't access the remote network after
> >>> ...
> >>> www.chicagotech.net/routingissuesonvpn.htm
> >>>
> >>> Bob Lin, MS-MVP, MCSE & CNE
> >>> Networking, Internet, Routing, VPN Troubleshooting on
> >>> http://www.ChicagoTech.net
> >>> How to Setup Windows, Network, VPN & Remote Access on
> >>> http://www.HowToNetworking.com "WQC"
> >>> <(E-Mail Removed)> wrote in message
> >>> news:A57FEECF-1B1D-407C-88D0-(E-Mail Removed)... Hi There;
> >>>
> >>> Please help me?
> >>> I already connected to RAS but I unable to connect internet or
> >>> cannot browse internet.
> >>> RAS is in Windows 2000 Server. On the server side, I can see that
> >>> I'm connected. But how come I cannot browse Internet?
> >>> What else do you think is lacking with my config?
> >>>
> >>> Thanks a lot
>
>
>

It probably won't work if your client is getting an APIPA address. Your
dialup client should be getting an IP address which is in the same IP subnet
as your proxy server.

WQC wrote:
> I already tried before putting the proxy settings into dialup
> connection properties but it is still not working.
> The RRAS server is set to DHCP. I also tried putting up static pool of
> addresses but still not working..
>
> "Bill Grant" wrote:
>
>> Do you know why your dialup client is getting an APIPA
>> (169.254.x.y) address? Is the RRAS server set to use DHCP for this
>> or have you set up a static pool of addresses?
>>
>> Bill Grant wrote:
>>> Try putting the proxy settings into the dialup connection properties
>>> of the client. You do this from the internet Options icon in
>>> Control Panel. Click the Connections tab then select the dialup
>>> connection, then settings.
>>> WQC wrote:
>>>> Hi Robert;
>>>>
>>>> Thanks for your reply but still won't work.
>>>> Do I need to have 2 NIC in my RAS server?
>>>> On client side, when I'm connected to RAS this is the IPconfig,
>>>> IPAddress: 169.254.224.28
>>>> Subnet: 255.255.255.255
>>>> Default Gateway: 169.254.224.28
>>>> DNS Servers: 128.128.145.11, 128.128.145.12
>>>> Why I cannot browse (intenet,ping,network) from client side?
>>>> By the way, in our LAN we have proxy...the address is 128.128.145.5
>>>> and gateway is 128.128.145.2..
>>>> Please advise.
>>>>
>>>> Regards,
>>>> Walter
>>>>
>>>> "Robert L [MS-MVP]" wrote:
>>>>
>>>>> You may try to uncheck use default gateway on the remote network.
>>>>> this link may help,
>>>>>
>>>>> routing issues on vpn
>>>>> Can't access the internal server when remote client establishes
>>>>> VPN Can't access
>>>>> the Internet while using VPN Can't access the remote network after
>>>>> ...
>>>>> www.chicagotech.net/routingissuesonvpn.htm
>>>>>
>>>>> Bob Lin, MS-MVP, MCSE & CNE
>>>>> Networking, Internet, Routing, VPN Troubleshooting on
>>>>> http://www.ChicagoTech.net
>>>>> How to Setup Windows, Network, VPN & Remote Access on
>>>>> http://www.HowToNetworking.com "WQC"
>>>>> <(E-Mail Removed)> wrote in message
>>>>> news:A57FEECF-1B1D-407C-88D0-(E-Mail Removed)... Hi
>>>>> There;
>>>>>
>>>>> Please help me?
>>>>> I already connected to RAS but I unable to connect internet or
>>>>> cannot browse internet.
>>>>> RAS is in Windows 2000 Server. On the server side, I can see
>>>>> that I'm connected. But how come I cannot browse Internet?
>>>>> What else do you think is lacking with my config?
>>>>>
>>>>> Thanks a lot

Thanks Bill, it's working now...I assigned the client PC with a specific IP
and did some settings in the Proxy and in the RAS

"Bill Grant" wrote:

> It probably won't work if your client is getting an APIPA address. Your
> dialup client should be getting an IP address which is in the same IP subnet
> as your proxy server.
>
> WQC wrote:
> > I already tried before putting the proxy settings into dialup
> > connection properties but it is still not working.
> > The RRAS server is set to DHCP. I also tried putting up static pool of
> > addresses but still not working..
> >
> > "Bill Grant" wrote:
> >
> >> Do you know why your dialup client is getting an APIPA
> >> (169.254.x.y) address? Is the RRAS server set to use DHCP for this
> >> or have you set up a static pool of addresses?
> >>
> >> Bill Grant wrote:
> >>> Try putting the proxy settings into the dialup connection properties
> >>> of the client. You do this from the internet Options icon in
> >>> Control Panel. Click the Connections tab then select the dialup
> >>> connection, then settings.
> >>> WQC wrote:
> >>>> Hi Robert;
> >>>>
> >>>> Thanks for your reply but still won't work.
> >>>> Do I need to have 2 NIC in my RAS server?
> >>>> On client side, when I'm connected to RAS this is the IPconfig,
> >>>> IPAddress: 169.254.224.28
> >>>> Subnet: 255.255.255.255
> >>>> Default Gateway: 169.254.224.28
> >>>> DNS Servers: 128.128.145.11, 128.128.145.12
> >>>> Why I cannot browse (intenet,ping,network) from client side?
> >>>> By the way, in our LAN we have proxy...the address is 128.128.145.5
> >>>> and gateway is 128.128.145.2..
> >>>> Please advise.
> >>>>
> >>>> Regards,
> >>>> Walter
> >>>>
> >>>> "Robert L [MS-MVP]" wrote:
> >>>>
> >>>>> You may try to uncheck use default gateway on the remote network.
> >>>>> this link may help,
> >>>>>
> >>>>> routing issues on vpn
> >>>>> Can't access the internal server when remote client establishes
> >>>>> VPN Can't access
> >>>>> the Internet while using VPN Can't access the remote network after
> >>>>> ...
> >>>>> www.chicagotech.net/routingissuesonvpn.htm
> >>>>>
> >>>>> Bob Lin, MS-MVP, MCSE & CNE
> >>>>> Networking, Internet, Routing, VPN Troubleshooting on
> >>>>> http://www.ChicagoTech.net
> >>>>> How to Setup Windows, Network, VPN & Remote Access on
> >>>>> http://www.HowToNetworking.com "WQC"
> >>>>> <(E-Mail Removed)> wrote in message
> >>>>> news:A57FEECF-1B1D-407C-88D0-(E-Mail Removed)... Hi
> >>>>> There;
> >>>>>
> >>>>> Please help me?
> >>>>> I already connected to RAS but I unable to connect internet or
> >>>>> cannot browse internet.
> >>>>> RAS is in Windows 2000 Server. On the server side, I can see
> >>>>> that I'm connected. But how come I cannot browse Internet?
> >>>>> What else do you think is lacking with my config?
> >>>>>
> >>>>> Thanks a lot
>
>
>