Re: cannot burn cd need help

cees,

would you care to explain this sentence of yours:

> 2 yes i have higmat and acces to a highmat pleyer

which highmat player do you think you have? Please tell us the make and
model number since I think there currently exists none that can play a
"HighMat Video". Most highmat players can only play "highmat audio" cd not
video.

Does your player have a "Highmat Video" logo on it?

--
Rehan
www.rehanfx.org - get transitions and effects for Windows MovieMaker



"cees beers" <ceesbeers@discussions.microsoft.com> wrote in message
news:604EC8F7-D442-468F-8DF6-DF7DF4B6FBE5@microsoft.com...
> well first of all thanks for the rections to help me!!
>
> yes i have two drive´s one dvd -ram called a multiburner that
> suposse to burn everything and a cd burner that also can be used as a
> dvd player only
>
> 1 i cannot burn to the cd burner
> 2 yes i have higmat and acces to a highmat pleyer
> 3 the both dvd player´s ( the multiburner and the cd burner ) cannot
> read dvd plus any more thats dvd+ only can read dvd -
> and normaly i can read both in multiburner and write dvd - and burn o
> n
> the cd player but no nothing anymore on cd burner with 2.1
> moviemaker
> also i can as a example can burn dvd ram and dvd raam 18gb if there
> is the dvd avaible ( maxwell)
> and yes the software could see the cd player and i could change it to cd
> rw
> or just cd r
> but nothing helped
> so i am really stucked here
> cees
>
>
>
>
>
> "John Kelly" wrote:
>
>> Sigh!!!
>>
>>
>> On 3-Oct-2004, "Rehan" <someone@somewhere.com> wrote:
>>
>> > If the original poster actually wants to write a Highmat video disk
>> > realizing that it wont run in any standalone dvd player; i agree that
>> > your
>> > solution is a help in right direction. However this is not completely
>> > clear
>> > from the original post, although it mentioned that he has applied the
>> > Highmat upgrade but did not say that he is aware of its limitations
>> > with DVD
>> > players.
>>
>> Shall we leave what the original poster wants down to him, instead of
>> your
>> usual second guessing.......
>>
>> The original poster in this case and many others where negative advice
>> was
>> given, is quite clear on what he wants......or is this one of those cases
>> you
>> are so famous for....remember...you decided that the number of pixels was
>> not
>> what Movie Maker declared it was using (and Media Player if I recal) but
>> instead it was some fancy set of numbers that conveniently fitted some
>> augument
>> you were trying to press home when you were corrected some months back.
>>
>> As far as the url you provide goes, it may be valid, but, having seen
>> others
>> from you that had no connection to the subject under discussion, I will
>> not be
>> visiting it......
>>
>> The original poster wants some help, I offered and you tried to belittle
>> it
>> (yet again) My advice was to give something a try, yours was negative
>> advice.....
>>
>> Try helping instead of telling people who have asked a question that they
>> cannot do what you "guess" they really meant
>>
>> --
>> John Kelly
>> www.the-kellys.org
>> www.the-kellys.co.uk
>> \|||/
>> (o o)
>> ----------ooO-(_)-Ooo-------------
>> All material gained from other sources is duly acknowledged. No Value is
>> obtained by publishing in any format other peoples work
>>

well i personaly do not have it but have some contacts at philips here in
holland
and they have it
i can use it
i want to make some promo video´s with wmv cd for future
my compagny
www.ada.prorider.org its my website
so simply want some promos with wmv format
but simply cann´t


"Rehan" wrote:

> cees,
>
> would you care to explain this sentence of yours:
>
> > 2 yes i have higmat and acces to a highmat pleyer
>
> which highmat player do you think you have? Please tell us the make and
> model number since I think there currently exists none that can play a
> "HighMat Video". Most highmat players can only play "highmat audio" cd not
> video.
>
> Does your player have a "Highmat Video" logo on it?
>
> --
> Rehan
> www.rehanfx.org - get transitions and effects for Windows MovieMaker
>
>
>
> "cees beers" <ceesbeers@discussions.microsoft.com> wrote in message
> news:604EC8F7-D442-468F-8DF6-DF7DF4B6FBE5@microsoft.com...
> > well first of all thanks for the rections to help me!!
> >
> > yes i have two drive´s one dvd -ram called a multiburner that
> > suposse to burn everything and a cd burner that also can be used as a
> > dvd player only
> >
> > 1 i cannot burn to the cd burner
> > 2 yes i have higmat and acces to a highmat pleyer
> > 3 the both dvd player´s ( the multiburner and the cd burner ) cannot
> > read dvd plus any more thats dvd+ only can read dvd -
> > and normaly i can read both in multiburner and write dvd - and burn o
> > n
> > the cd player but no nothing anymore on cd burner with 2.1
> > moviemaker
> > also i can as a example can burn dvd ram and dvd raam 18gb if there
> > is the dvd avaible ( maxwell)
> > and yes the software could see the cd player and i could change it to cd
> > rw
> > or just cd r
> > but nothing helped
> > so i am really stucked here
> > cees
> >
> >
> >
> >
> >
> > "John Kelly" wrote:
> >
> >> Sigh!!!
> >>
> >>
> >> On 3-Oct-2004, "Rehan" <someone@somewhere.com> wrote:
> >>
> >> > If the original poster actually wants to write a Highmat video disk
> >> > realizing that it wont run in any standalone dvd player; i agree that
> >> > your
> >> > solution is a help in right direction. However this is not completely
> >> > clear
> >> > from the original post, although it mentioned that he has applied the
> >> > Highmat upgrade but did not say that he is aware of its limitations
> >> > with DVD
> >> > players.
> >>
> >> Shall we leave what the original poster wants down to him, instead of
> >> your
> >> usual second guessing.......
> >>
> >> The original poster in this case and many others where negative advice
> >> was
> >> given, is quite clear on what he wants......or is this one of those cases
> >> you
> >> are so famous for....remember...you decided that the number of pixels was
> >> not
> >> what Movie Maker declared it was using (and Media Player if I recal) but
> >> instead it was some fancy set of numbers that conveniently fitted some
> >> augument
> >> you were trying to press home when you were corrected some months back.
> >>
> >> As far as the url you provide goes, it may be valid, but, having seen
> >> others
> >> from you that had no connection to the subject under discussion, I will
> >> not be
> >> visiting it......
> >>
> >> The original poster wants some help, I offered and you tried to belittle
> >> it
> >> (yet again) My advice was to give something a try, yours was negative
> >> advice.....
> >>
> >> Try helping instead of telling people who have asked a question that they
> >> cannot do what you "guess" they really meant
> >>
> >> --
> >> John Kelly
> >> www.the-kellys.org
> >> www.the-kellys.co.uk
> >> \|||/
> >> (o o)
> >> ----------ooO-(_)-Ooo-------------
> >> All material gained from other sources is duly acknowledged. No Value is
> >> obtained by publishing in any format other peoples work
> >>
>
>
>

Oh dear,

This is well out of order. Stop picking on the OP rehan...just because your
invented scanario is wrong does not mean you have to demand that the OP prove
everything he said...you were wrong...live with it.

--
Best Wishes.....John Kelly
www.the-kellys.org
www.the-kellys.co.uk
\|||/
(o o)
----------ooO-(_)-Ooo-------------
All material gained from other sources is duly acknowledged. No Value is
obtained by publishing in any format other peoples work

Hello,

Just had a look at the video on your website, Excellent stuff & the quality was
very good too. It was interesting too me because I used to do a lot of long
distance cycling as well as speed trials. I once got stopped by a Warwickshire
Police Traffic Car for speeding....most embarrassing. Sigh, those were the days

--
Best Wishes.....John Kelly
www.the-kellys.org
www.the-kellys.co.uk
\|||/
(o o)
----------ooO-(_)-Ooo-------------
All material gained from other sources is duly acknowledged. No Value is
obtained by publishing in any format other peoples work