MM2 keeps crashing!

every time i try to put on an effect, title, transition etc.. my mm2 crashes!
it just quits, no warnings, no messages.
please help?

That's a fairly common issue. Check the Problem Solving > Acceleration and
Codecs page of my site.
--
PapaJohn

Movie Maker 2: www.papajohn.org
PhotoStory 2: www.photostory.papajohn.org
..
..
"GsK" <GsK@discussions.microsoft.com> wrote in message
news:543CCA35-A528-44B8-AB74-5E02BF88527C@microsoft.com...
> every time i try to put on an effect, title, transition etc.. my mm2
> crashes!
> it just quits, no warnings, no messages.
> please help?

first let me thank you for replying to the post so quickly.
however...
every time i post a question, you have this automated answer.
so looked back, and saw that you have this answer to most problems: "look in
my website" are you payed per clicks?
so i did a simple search for my problem and found an much easier answer
posted by someone else:

simply rename: divxaf.ax in the windows/system32 folder. (for example:
divxaf.ax_)
and that's it!!!

instead of spending an hour looking for answers on your website.
thank you.
GsK



"PapaJohn" wrote:

> That's a fairly common issue. Check the Problem Solving > Acceleration and
> Codecs page of my site.
> --
> PapaJohn
>
> Movie Maker 2: www.papajohn.org
> PhotoStory 2: www.photostory.papajohn.org
> ..
> ..
> "GsK" <GsK@discussions.microsoft.com> wrote in message
> news:543CCA35-A528-44B8-AB74-5E02BF88527C@microsoft.com...
> > every time i try to put on an effect, title, transition etc.. my mm2
> > crashes!
> > it just quits, no warnings, no messages.
> > please help?
>
>
>

No, I don't get paid by or for clicks.

Most people would resolved it by renaming divxaf.ax.... but others need the
list of the others as they don't have divxaf.ax or they have more than one
problem codec.

It's true I copy and paste many of my posts, but it's not automated.... I
read the post first and respond with what I feel is most appropriate.

I'm glad you found and resolved it..... much better than if I told you to go
rename divxaf.ax and you didn't have the file and that wasn't the issue.
--
PapaJohn

Movie Maker 2 - www.papajohn.org
Photo Story 2 - www.photostory.papajohn.org

..
"gsk" <gsk@discussions.microsoft.com> wrote in message
news:6747CBFB-3B22-4AFA-A890-78D762DDCFCB@microsoft.com...
> first let me thank you for replying to the post so quickly.
> however...
> every time i post a question, you have this automated answer.
> so looked back, and saw that you have this answer to most problems: "look
in
> my website" are you payed per clicks?
> so i did a simple search for my problem and found an much easier answer
> posted by someone else:
>
> simply rename: divxaf.ax in the windows/system32 folder. (for example:
> divxaf.ax_)
> and that's it!!!
>
> instead of spending an hour looking for answers on your website.
> thank you.
> GsK
>
>
>
> "PapaJohn" wrote:
>
> > That's a fairly common issue. Check the Problem Solving > Acceleration
and
> > Codecs page of my site.
> > --
> > PapaJohn
> >
> > Movie Maker 2: www.papajohn.org
> > PhotoStory 2: www.photostory.papajohn.org
> > ..
> > ..
> > "GsK" <GsK@discussions.microsoft.com> wrote in message
> > news:543CCA35-A528-44B8-AB74-5E02BF88527C@microsoft.com...
> > > every time i try to put on an effect, title, transition etc.. my mm2
> > > crashes!
> > > it just quits, no warnings, no messages.
> > > please help?
> >
> >
> >

Hello there,

You sound as though you are suffering from a codec problem. There are two root
causes and below you will find the solution for each together with some notes
on other issues.

Option 1)

The one stop solution for that is a program called Rename Codecs and it is
available from my web site (Free). Make sure you check out the FAQ, on the
site, on what it does and how to run it (That will take about one minute of
your time!!) All the info you need is on the web site. The latest version is
1.51.

This reassuringly safe to use program requires no knowledge on your part about
what it is doing or how it is doing it or what it is doing it too!!! neither do
you need to know where any of these files are or whether it is safe to rename
them or not.....and best of all, ITS FREE !!!

Option 2)

If this does not solve your problem then try the following out...it has proved
to be a successful procedure for a variety of problems.

1) Download the full version of DirectX Ver 9.0b, Media Player 9 and Movie
Maker 2.

2) Reboot you computer and Install DirectX

3) Reboot again and install Windows Media Player 9

4) Reboot yet again and install Movie Maker 2

5) Reboot one more time

Yes it sounds very tedious, but if you want to be certain all file locks are
removed so that the correct files can be installed this is the way you have to
go.

It is very important that you only download the full versions of these programs
and that you DO NOT attempt an install over the internet.

Other Notes
===========
Graphic Card Acceleration
-------------------------

There is advice floating around that you should disable the graphics
acceleration abilities of your graphics card if Movie Maker locks up or crashes
out. Doing this is roughly equivalent to taking out your current graphics card
and replacing it with one that is several years old....this is not the way
forward!

The Graphics card on the machine I edit on is a cut above the average, it has
DV In & Out as well as Video In & Out. It does all sorts of clever things and
it is extremely fast. Then the day came when I tried Movie Maker 2 for the
first time. It was a disaster. Knowing what the problem was I immediately
logged on to Microsoft and got the latest driver. There was no change with the
performance of the Graphics card with respect to Movie Maker. After a lot of
messing about I went to the cards manufacturer and downloaded there most recent
driver. I was convinced that the one from Microsoft was in some way defective.
It turned out that I was right but for the wrong reason.

The version of the driver from Microsoft was more recent than the one on my
system AND more recent than the one from the OEM.BUT, the OEM had made minor
changes to how the card worked and these were not taken into consideration by
the Microsoft update!!!

So, do not get the generic update from Microsoft until you have tried the
latest driver from the manufacturer of your card.

Registration
------------

There is in my view some very bad advice floating around that tells you to
unregister the offending codec. If you take this advise be warned that
unregistering any file and doing it wrong will more than likely stop the
program that file belongs to from working all together and may in an extreme
situation cause your entire XP system to fail. This is true whether you make a
mistake using the Registry editor or the registration program itself, one
mistake and you are potentially in deep trouble. Whatever you unregister in
this manner has to be restored and you should take note that the registration
of a codec can often involve more than one registry entry. If you are expert in
these matters you will have no problem.

I have also found that MP3, Mpeg and Jpeg files can cause problems, So...

Convert all MP3 to WAV or WMA

Convert all MPeg to AVI

Convert all Jpeg to BMP

Video Conversion
----------------

For Video Conversion you should also check out the Knowledge Base Section of my
"Great Links > Knowledge Base" One of the website's in there called "Video
Help" has the best collection of useful information I have yet come across on
converting between the various formats together with links to the software
needed.

--
Best Wishes.....John Kelly
www.the-kellys.org
www.the-kellys.co.uk
---
All material gained from other sources is duly acknowledged. No Value is
obtained by publishing in any format other peoples work